Looking for a top mount bell for my 1.5” LE Atlantic similar to the photo below. Would appreciate any info to assist in my search.
Wanted: 1.5” Brass top mount bell
Moderators: gwrdriver, Harold_V
Re: Wanted: 1.5” Brass top mount bell
As previously mentioned Doug Edwards (aka Precision Locomotive) Username:"Doug_Edwards"
viewtopic.php?f=30&t=111251
I purchased one some years ago.
Dave
viewtopic.php?f=30&t=111251
I purchased one some years ago.
Dave
- makinsmoke
- Posts: 2260
- Joined: Thu Jul 10, 2003 12:56 pm
- Location: Texas Hill Country
Re: Wanted: 1.5” Brass top mount bell
Have a look at Allen Models bell castings.
Reasonably priced and can be finished out nicely.
Reasonably priced and can be finished out nicely.
-
- Posts: 1595
- Joined: Sun Jan 05, 2003 8:47 am
- Location: Florida, on the Lake Wales Ridge
Re: Wanted: 1.5” Brass top mount bell
Highiron makes a couple batches a year. Very top shelf.
Tim
Tim
He who dies with the most unfinished projects: Should of put more time into their hobby.
-
- Posts: 1724
- Joined: Thu Jan 09, 2003 6:50 pm
- Location: Michigan, USA
Re: Wanted: 1.5” Brass top mount bell
I believe Steve at Allen Models is out of stock.makinsmoke wrote: ↑Sun Jan 15, 2023 9:25 am Have a look at Allen Models bell castings.
Reasonably priced and can be finished out nicely.
-
- Posts: 348
- Joined: Tue Jan 07, 2003 2:56 am
- Location: Waltham, MA
Re: Wanted: 1.5” Brass top mount bell
I make a front mount bell and I will have a top mount bell when I can get one more part cast.
The bells I sell are cast in bell bronze, not silicon bronze, bell bronze sounds better.
The bells I sell are cast in bell bronze, not silicon bronze, bell bronze sounds better.
Re: Wanted: 1.5” Brass top mount bell
I have top mount bells in stock standard stud or Baldwin machined ready to mount the contact me at highiron@aol.com or 732-239-9960