Boring chuck bore

Topics include, Machine Tools & Tooling, Precision Measuring, Materials and their Properties, Electrical discussions related to machine tools, setups, fixtures and jigs and other general discussion related to amateur machining.

Moderators: GlennW, Harold_V

ernest_t
Posts: 8
Joined: Thu Jul 08, 2021 7:46 pm
Location: TN. USA

Re: Boring chuck bore

Post by ernest_t »

Make a cap that will screw onto the spindle. Chuck onto the cap. You'll need a way to remove the cap, two flats on thr end, slot across the end, two holes in the end, etc.
SteveM
Posts: 7763
Joined: Mon Jun 27, 2005 6:18 pm
Location: Wisconsin

Re: Boring chuck bore

Post by SteveM »

I've had stuff come up and not gotten to this, but I have the faceplate out and some clamps. Needed to buy some bolts because some of my hardware is still in storage.
Will be getting back to this in a few weeks.

Steve
Post Reply