Newbie getting in over my head?

All discussion about lathes including but not limited to: South Bend, Hardinge, Logan, Monarch, Clausing and other HSM lathes, including imports

Moderators: GlennW, Harold_V

User avatar
NP317
Posts: 4557
Joined: Tue Jun 24, 2014 2:57 pm
Location: Northern Oregon, USA

Re: Newbie getting in over my head?

Post by NP317 »

Careful Harold, or you will begin to catch up to me...
RussN
User avatar
Harold_V
Posts: 20231
Joined: Fri Dec 20, 2002 11:02 pm
Location: Onalaska, WA USA

Re: Newbie getting in over my head?

Post by Harold_V »

Bill Shields wrote: Sun Jan 22, 2023 4:57 pm Not possible
Chuckle!
Well, I thought I'd hit bottom, but I seem to just keep digging.

H
Wise people talk because they have something to say. Fools talk because they have to say something.
User avatar
Bill Shields
Posts: 10459
Joined: Fri Dec 21, 2007 4:57 am
Location: 39.367, -75.765
Contact:

Re: Newbie getting in over my head?

Post by Bill Shields »

At least it is with a hand shovel and not a jackhammer
Too many things going on to bother listing them.
nessism
Posts: 52
Joined: Sun Oct 23, 2022 10:54 pm

Re: Newbie getting in over my head?

Post by nessism »

What thickness sheet metal for the back splash? .071" okay?

Rotex mill any good? Seller wants $1500, which seems like too much. But...this is So Calif, where everything is expensive. It's a dedicated vertical. A number of similar horizontal units were converted back in the day.
Screenshot_20230128_012238.png
Screenshot_20230128_012238.png (1.13 MiB) Viewed 3315 times
User avatar
Bill Shields
Posts: 10459
Joined: Fri Dec 21, 2007 4:57 am
Location: 39.367, -75.765
Contact:

Re: Newbie getting in over my head?

Post by Bill Shields »

I think it is a bit much...
Too many things going on to bother listing them.
nessism
Posts: 52
Joined: Sun Oct 23, 2022 10:54 pm

Re: Newbie getting in over my head?

Post by nessism »

Bill Shields wrote: Sat Jan 28, 2023 5:14 pm I think it is a bit much...
I agree, but what small mills should I target that can be had for less? Are the Chinese drill/mills worth considering?
User avatar
Bill Shields
Posts: 10459
Joined: Fri Dec 21, 2007 4:57 am
Location: 39.367, -75.765
Contact:

Re: Newbie getting in over my head?

Post by Bill Shields »

Do not know exactly.

Suggest something with an R8 spindle and more z height would be my recommendation.

I have an ROC mill...built 2 steamers with it, and is ok but just that.

Suggest avoiding round column if possible.

Do not be in a hurry
Too many things going on to bother listing them.
nessism
Posts: 52
Joined: Sun Oct 23, 2022 10:54 pm

Re: Newbie getting in over my head?

Post by nessism »

I'm lagging on getting this machine up and running, proper like. I've got DRO parts I'm working on installing. And learned tonight, that the 3 jaw chuck is jacked up and doesn't close properly. I'm going to bust that thing down and see what's going on with it this weekend.

One other thing that's bothering me is that the stand is TALL. I've got casters on it currently, which will come off, but that will only drop the machine 3 inches or so. Guess I'll see how it feels once the casters are off, and the unit leveled in its home. I can imagine a lathe stand project in my future, though.
User avatar
Bill Shields
Posts: 10459
Joined: Fri Dec 21, 2007 4:57 am
Location: 39.367, -75.765
Contact:

Re: Newbie getting in over my head?

Post by Bill Shields »

And how tall are you?

If you stand at the lathe with your elbow at a right angle...are the lathe controls right there?

I am 6'1", have a bad back and raise all of my lathes so that I do not have to bend over so far to focus on the chuck/ work.

But then... that's me
Too many things going on to bother listing them.
Inspector
Posts: 721
Joined: Mon Feb 23, 2009 4:25 am
Location: Saskatoon, SK, Canada

Re: Newbie getting in over my head?

Post by Inspector »

Rather than make a new stand nail together a platform of boards. Three or four 1" or 2" thick pieces laying on the floor out from the lathe with 1" boards across, 1" gaps between them. Don't paint them for better traction. It will raise you and be more comfortable to stand on for long periods. Stand them up to sweep underneath.

Pete
User avatar
Bill Shields
Posts: 10459
Joined: Fri Dec 21, 2007 4:57 am
Location: 39.367, -75.765
Contact:

Re: Newbie getting in over my head?

Post by Bill Shields »

soft rubber padding helps - I have some of these 'puzzle pieces' of rubber that interlock to make however large a work area.

because they come apart into 12" squares (approx), they are easy to take outside and 'shake'.

out in the big shop, we have them on top of the 'raise me up' pallet to get to a working height of a series II bridgeport.
Too many things going on to bother listing them.
User avatar
rmac
Posts: 786
Joined: Tue Jun 26, 2012 12:48 am
Location: Phoenix, Arizona

Re: Newbie getting in over my head?

Post by rmac »

nessism wrote: Thu Feb 23, 2023 9:40 pm And learned tonight, that the 3 jaw chuck is jacked up and doesn't close properly.
Can you give more detail here? What exactly do you mean by "doesn't close properly"?
Post Reply