Coles Worthington Duplex Steam Pump
Moderators: gwrdriver, Harold_V
-
- Posts: 7
- Joined: Sun Dec 02, 2018 1:25 am
Coles Worthington Duplex Steam Pump
Hello, I am looking for castings for the Coles Duplex Pump. There must be a few laying around in the dark corners of shops! Better yet maybe someone has a lead on where the patterns may be.
Thanks!
Steamingly Andrew
Thanks!
Steamingly Andrew
-
- Posts: 1598
- Joined: Sun Jan 05, 2003 8:47 am
- Location: Florida, on the Lake Wales Ridge
Re: Coles Worthington Duplex Steam Pump
I think I have a set. I will look for them Friday.
Tim
Tim
He who dies with the most unfinished projects: Should of put more time into their hobby.
-
- Posts: 1598
- Joined: Sun Jan 05, 2003 8:47 am
- Location: Florida, on the Lake Wales Ridge
Re: Coles Worthington Duplex Steam Pump
I have been under the weather. I have not forgot.
Tim
Tim
He who dies with the most unfinished projects: Should of put more time into their hobby.
Re: Coles Worthington Duplex Steam Pump
Were you able to purchase a set of castings? If not I have a set with prints.Partsmaker wrote: ↑Thu Feb 03, 2022 10:48 pm Hello, I am looking for castings for the Coles Duplex Pump. There must be a few laying around in the dark corners of shops! Better yet maybe someone has a lead on where the patterns may be.
Thanks!
Steamingly Andrew
Dave
Re: Coles Worthington Duplex Steam Pump
I think I have a set of castings. Interested? Too late?
-
- Posts: 82
- Joined: Mon Jul 11, 2005 10:44 am
- Contact:
Re: Coles Worthington Duplex Steam Pump
I am stil searching for the water seal cups for this Cole's Duplex pump.
Any available for purchase?
Thanks
RussN
Any available for purchase?
Thanks
RussN
- Adirondack
- Posts: 410
- Joined: Tue Aug 23, 2011 6:59 pm
- Location: southern CT
Re: Coles Worthington Duplex Steam Pump
Bless you for sharing this.wewilliams wrote: ↑Thu Aug 18, 2022 8:43 pm https://grabcad.com/library/worthington ... eam-pump-1
If you want a free set of plans in 3D
C.
Adirondack Car & Foundry
Check out our projects: https://www.facebook.com/ADKrail/
Visit our ALL-NEW online store: https://adirondackcarfoundry.square.site/
A little locomotive with 4 wheels on the track is a lot more fun
than a 1/2 finished one with 16 wheels on the bench!
Check out our projects: https://www.facebook.com/ADKrail/
Visit our ALL-NEW online store: https://adirondackcarfoundry.square.site/
A little locomotive with 4 wheels on the track is a lot more fun
than a 1/2 finished one with 16 wheels on the bench!
-
- Posts: 82
- Joined: Mon Jul 11, 2005 10:44 am
- Contact:
Re: Coles Worthington Duplex Steam Pump
Quite welcome
Re: Coles Worthington Duplex Steam Pump
Hi
I am a bit late to this, but I am starting a project that could use this little pump, any more casting sets lurking around?
Bob
I am a bit late to this, but I am starting a project that could use this little pump, any more casting sets lurking around?
Bob
Re: Coles Worthington Duplex Steam Pump
are castings needed with the grabcad drawings?