1-1/2" scale driver castings

For the Buying/Selling/Trading of items of interest to those of us in the Live Steam Hobby.

Moderators: gwrdriver, Harold_V

Post Reply
User avatar
shayloco
Posts: 264
Joined: Fri Mar 28, 2003 11:00 am
Location: Rhode Island

1-1/2" scale driver castings

Post by shayloco »

Two drive wheels for Pioneer type loco?
Tread would finish at 7.5". Flange is 8" o.d. Thickness is 1".
$40 + $15 shipping in flat rate box to USA. *** SOLD ***
Drivers2Pioneer2.jpg
Drivers2Pioneer1.jpg
Two drivers.
8-3/8" rough od over flange. 7-3/4" or 7-7/8" finish. Approx 3-5/8" stroke. 13/16" thick.
$40 + $15 shipping in flat rate box to USA.
Drivers2SquareFlange1.jpg
Drivers2SquareFlange2.jpg
Two driver patterns.
Finish at 7" or a little less. Flange is 7-3/4" rough. Little over an inch thick. 3-1/2" or less stroke. Have screw holes and writing that indicate these were used as patterns. Note different size counterweights. These are cast iron.
$40 + $15 shipping in flat rate box to USA.
Drivers2patterns2.jpg
Send PM.
-Larry
Post Reply