The trick to tapping on a Bridgeport without a tapping head.

Discussion on all milling machines vertical & horizontal, including but not limited to Bridgeports, Hardinge, South Bend, Clausing, Van Norman, including imports.

Moderators: GlennW, Harold_V

Post Reply
Don Bailey
Posts: 86
Joined: Fri Dec 19, 2014 4:23 pm
Location: Auburn Hills, Mi.

The trick to tapping on a Bridgeport without a tapping head.

Post by Don Bailey »

This is a method to tap on a Bridgeport without a tapping head that will help avoid breaking the tap. https://www.youtube.com/watch?v=LkbZPP8ErvU

Enjoy and Merry Christmas.
Top
Post Reply

Return to “Milling Machines”