I have a no-name cutoff tool holder and need to find replacement inserts. The size Is 2mm thick, 7mm high, and about 18.5mm long. There are no markings on the insert (or the holder) so I don't have a clue about grade or Mfg, but based upon my usage it's spectacular at cutting off non-ferrous, but not so good with steels.
Can anyone make a ballpark identification and suggest where should I start looking?
Help ID'ing and Finding an Insert
Help ID'ing and Finding an Insert
- Attachments
-
- Cutoff.jpg (77.98 KiB) Viewed 923 times
GWRdriver
Nashville TN
Nashville TN
Re: Help ID'ing and Finding an Insert
This looks close
https://www.mscdirect.com/product/details/78676756
https://www.mscdirect.com/product/details/78676756
Rick
“We make a living by what we get, but we make a life by what we give." Sir Winston Leonard Spencer Churchill (1874-1965)
"Peace is that brief glorious moment in history when everybody stands around reloading". Unknown
Murphy's Law: " If it can go wrong it will"
O-Tool's Corollary: "Murphy was entirely too optimistic"
“We make a living by what we get, but we make a life by what we give." Sir Winston Leonard Spencer Churchill (1874-1965)
"Peace is that brief glorious moment in history when everybody stands around reloading". Unknown
Murphy's Law: " If it can go wrong it will"
O-Tool's Corollary: "Murphy was entirely too optimistic"
Re: Help ID'ing and Finding an Insert
That looks pretty close doesn't it. Thanks for the pointer.
GWRdriver
Nashville TN
Nashville TN