Multi-tool and shop math....

The Junk Drawer is for those Off Topical discussions where we can ask questions of the community that we feel might have the ability to help out.

Moderator: Harold_V

Post Reply
User avatar
Greg_Lewis
Posts: 3014
Joined: Wed Jan 15, 2003 2:44 pm
Location: Fresno, CA

Multi-tool and shop math....

Post by Greg_Lewis »

multi tool.jpg
multi tool.jpg (25.21 KiB) Viewed 1901 times

51fa14188724be8cf9abf4d524a293de.jpg
51fa14188724be8cf9abf4d524a293de.jpg (28.51 KiB) Viewed 1901 times
Greg Lewis, Prop.
Eyeball Engineering — Home of the dull toolbit.
Our motto: "That looks about right."
Celebrating 35 years of turning perfectly good metal into bits of useless scrap.
User avatar
Charles T. McCullough
Posts: 384
Joined: Fri Apr 06, 2007 2:25 pm

Re: Multi-tool and shop math....

Post by Charles T. McCullough »

The math is wrong. That should be 14mm - 10¢ = 1/2in
User avatar
Bill Shields
Posts: 10460
Joined: Fri Dec 21, 2007 4:57 am
Location: 39.367, -75.765
Contact:

Re: Multi-tool and shop math....

Post by Bill Shields »

looks like something a certain group of M/C riders would carry in their saddlebags (50 years ago).

all that is missing is duct tape
Too many things going on to bother listing them.
Post Reply