Did someone say hydraulic hedge trimmer?
Lathe chuck xmas tree stand
Moderator: Harold_V
- liveaboard
- Posts: 1981
- Joined: Sun Dec 08, 2013 1:40 pm
- Location: southern Portugal
- Contact:
- Bill Shields
- Posts: 10556
- Joined: Fri Dec 21, 2007 4:57 am
- Location: 39.367, -75.765
- Contact:
Re: Lathe chuck xmas tree stand
can you put it above a christmas tree, pitched at an angle and 'circle your way around' ?
i strongly suspect that what my neighbors use is derived from what you have there...
i strongly suspect that what my neighbors use is derived from what you have there...
Too many things going on to bother listing them.
- liveaboard
- Posts: 1981
- Joined: Sun Dec 08, 2013 1:40 pm
- Location: southern Portugal
- Contact:
Re: Lathe chuck xmas tree stand
my turning circle is a bit large, but the height and angle are no problem.
Just have to reverse and come from another direction.
Nothing is derived from this thing, it's all home made. But there are lots of similar factory built ones, and ones with circular saw blades that will cut through larger branches.
Just have to reverse and come from another direction.
Nothing is derived from this thing, it's all home made. But there are lots of similar factory built ones, and ones with circular saw blades that will cut through larger branches.
- Bill Shields
- Posts: 10556
- Joined: Fri Dec 21, 2007 4:57 am
- Location: 39.367, -75.765
- Contact:
- liveaboard
- Posts: 1981
- Joined: Sun Dec 08, 2013 1:40 pm
- Location: southern Portugal
- Contact:
Re: Lathe chuck xmas tree stand
My hedge is 10' high, 10' wide, and 400 yards long...
https://www.youtube.com/watch?v=cAu8WVSGzw8&t=60s
https://www.youtube.com/watch?v=cAu8WVSGzw8&t=60s
- Bill Shields
- Posts: 10556
- Joined: Fri Dec 21, 2007 4:57 am
- Location: 39.367, -75.765
- Contact:
Re: Lathe chuck xmas tree stand
cool...
what if your hedge is 10' high, 4' diameter and tapered like a Christmas Tree???
can the tractor sit stationary and spin the trimmer around the top of the hedge???
https://www.cgernon.com/sptf/trimming.htm
granted - it is a VERY SPECIALIZED business
it is very important that the taper be accurate to 0.1 degrees
what if your hedge is 10' high, 4' diameter and tapered like a Christmas Tree???
can the tractor sit stationary and spin the trimmer around the top of the hedge???
https://www.cgernon.com/sptf/trimming.htm
granted - it is a VERY SPECIALIZED business
it is very important that the taper be accurate to 0.1 degrees
Too many things going on to bother listing them.
- liveaboard
- Posts: 1981
- Joined: Sun Dec 08, 2013 1:40 pm
- Location: southern Portugal
- Contact:
Re: Lathe chuck xmas tree stand
No; we don't do Christmas in our house, or bring a tree inside to die, so really I have no use for that function.
Or maybe I would have built it.
Or maybe I would have built it.