Mason Bogie 2-6-6T ****SOLD****
Moderator: Harold_V
- ChuckHackett-844
- Posts: 232
- Joined: Wed May 03, 2017 3:54 pm
- Location: Tampa, Florida
Mason Bogie 2-6-6T ****SOLD****
I have a full set of un-machined castings produced by Richard Ulin (many bronze, lost-wax castings) for the 2.5" scale Narrow Gauge Mason Bogie 2-6-6T locomotive. For those unfamiliar with this unique engine:
http://www.pacificng.com/ref/mason/pdf/ ... ril-09.pdf
http://www.ross-crain.com/rr_dsp2a-266T.htm
https://www.google.com/search?client=fi ... ason+bogie
One of the most interesting aspects is that the engine truck pivots under the boiler to handle the small radius curves of the Denver and South Park railroad.
I also have a complete wood cab kit with all moldings, etc.
Comes with a full set of drawings. I also understand that there was a construction article series in 7+ Railroader
There was also a
I have a steel boiler with copper flues built by Ray Panel (sp?) a well known boiler builder (Texas, now deceased). The boiler has never had water in it. Ray also built the new boiler for my Northern at the same time and it's still going strong.
I have had the castings for about 20 years so they are well "aged" !
I love this locomotive but I have come to the realization that I probably will never get to it.
I do not have pictures of the castings, et. al. but, if there is enough interest, I'll dig them out (still buried from when we moved 5 years ago).
As of yet I have no idea what I will be asking for it all.
http://www.pacificng.com/ref/mason/pdf/ ... ril-09.pdf
http://www.ross-crain.com/rr_dsp2a-266T.htm
https://www.google.com/search?client=fi ... ason+bogie
One of the most interesting aspects is that the engine truck pivots under the boiler to handle the small radius curves of the Denver and South Park railroad.
I also have a complete wood cab kit with all moldings, etc.
Comes with a full set of drawings. I also understand that there was a construction article series in 7+ Railroader
There was also a
I have a steel boiler with copper flues built by Ray Panel (sp?) a well known boiler builder (Texas, now deceased). The boiler has never had water in it. Ray also built the new boiler for my Northern at the same time and it's still going strong.
I have had the castings for about 20 years so they are well "aged" !
I love this locomotive but I have come to the realization that I probably will never get to it.
I do not have pictures of the castings, et. al. but, if there is enough interest, I'll dig them out (still buried from when we moved 5 years ago).
As of yet I have no idea what I will be asking for it all.
Regards,
Chuck Hackett, UP Northern 844, Mich-Cal Shay #2
Owner, MiniRail Solutions, LLC, RR Signal Systems (http://www.MiniRailSolutions.com)
"By the work, One knows the workman"
Chuck Hackett, UP Northern 844, Mich-Cal Shay #2
Owner, MiniRail Solutions, LLC, RR Signal Systems (http://www.MiniRailSolutions.com)
"By the work, One knows the workman"
- Erskine Tramway
- Posts: 390
- Joined: Wed Sep 10, 2014 4:13 pm
- Location: South Dakota
- Contact:
Re: Mason Bogie 2-6-6T
I'm too old to start on that too, Chuck. From what I've seen, they are nice models. The Mason engines were the American equivalent of the Ffestiniog's Fairlie single-bogie locos. My dad told me he liked to take a shortcut through the cab of the South Park bogie when he was going to college at Ames, Iowa, unfortunately cut up in a WW2 scrap drive. I hope you find a buyer.
Mike
Mike
Former Locomotive Engineer and Designer, Sandley Light Railway Equipment Works, Inc. and Riverside & Great Northern Railway 1962-77
BN RR Locomotive Engineer 1977-2014, Retired
BN RR Locomotive Engineer 1977-2014, Retired
-
- Posts: 567
- Joined: Wed Jan 07, 2004 8:04 am
- Location: Princeton, NJ
Re: Mason Bogie 2-6-6T
You should put this in the for sale section. I really wanted to build one of these years ago its a great looking model.
- ChuckHackett-844
- Posts: 232
- Joined: Wed May 03, 2017 3:54 pm
- Location: Tampa, Florida
Re: Mason Bogie 2-6-6T
The only 'For Sale' section I see is very general For Sale (lathes, etc.). Is there one here for Live Steam related items? I know about Discover Live Steam.
Regards,
Chuck Hackett, UP Northern 844, Mich-Cal Shay #2
Owner, MiniRail Solutions, LLC, RR Signal Systems (http://www.MiniRailSolutions.com)
"By the work, One knows the workman"
Chuck Hackett, UP Northern 844, Mich-Cal Shay #2
Owner, MiniRail Solutions, LLC, RR Signal Systems (http://www.MiniRailSolutions.com)
"By the work, One knows the workman"
Re: Mason Bogie 2-6-6T
Right under your nose!ChuckHackett-844 wrote: ↑Sun Jul 05, 2020 9:06 am The only 'For Sale' section I see is very general For Sale (lathes, etc.). Is there one here for Live Steam related items? I know about Discover Live Steam.
https://www.chaski.org/homemachinist/viewforum.php?f=30
Live Steam Marketplace
H
Wise people talk because they have something to say. Fools talk because they have to say something.
-
- Posts: 2930
- Joined: Mon Nov 10, 2014 1:39 pm
- Location: Woodinville, Washington
Re: Mason Bogie 2-6-6T
Chuck, always liked this design.
what is the design size for the boiler, and could this casting set be modified to fit 12” gauge?
If so, I’d be interested also.
Thanks,
Glenn
what is the design size for the boiler, and could this casting set be modified to fit 12” gauge?
If so, I’d be interested also.
Thanks,
Glenn
Moderator - Grand Scale Forum
Motive power : 1902 A.S.Campbell 4-4-0 American - 12 5/8" gauge, 1955 Ottaway 4-4-0 American 12" gauge
Ahaha, Retirement: the good life - drifting endlessly on a Sea of projects....
Motive power : 1902 A.S.Campbell 4-4-0 American - 12 5/8" gauge, 1955 Ottaway 4-4-0 American 12" gauge
Ahaha, Retirement: the good life - drifting endlessly on a Sea of projects....
Re: Mason Bogie 2-6-6T
If possible would you happen to post some of the pictures? I am currently constructing my own 2.5-scale mason bogie. Also, what is the boiler size of this locomotive ?
Daniel.
Daniel.
- ChuckHackett-844
- Posts: 232
- Joined: Wed May 03, 2017 3:54 pm
- Location: Tampa, Florida
Re: Mason Bogie 2-6-6T
"Your own" as in you are doing your own castings/fabrications, or with Rich's castings?
What pictures are you referring to? Construction was never started on the locomotive so I do not have construction pictures. I have the complete set of drawings, castings, cab kit, etc.
I have a boiler built by Ray Panel at Steam Age, Texas (now deceased) as per Rich's drawings.
Regards,
Chuck Hackett, UP Northern 844, Mich-Cal Shay #2
Owner, MiniRail Solutions, LLC, RR Signal Systems (http://www.MiniRailSolutions.com)
"By the work, One knows the workman"
Chuck Hackett, UP Northern 844, Mich-Cal Shay #2
Owner, MiniRail Solutions, LLC, RR Signal Systems (http://www.MiniRailSolutions.com)
"By the work, One knows the workman"
- ChuckHackett-844
- Posts: 232
- Joined: Wed May 03, 2017 3:54 pm
- Location: Tampa, Florida
Re: Mason Bogie 2-6-6T
Hmm, 7.5" to 12" ... I suppose it's possible. Cylinders, wheels, etc would all be ok but you would have to modify the cab front and build the boiler to a different scale but, yes, a lot of it would just transfer over.Glenn Brooks wrote: ↑Sun Jul 05, 2020 5:50 pm Chuck, always liked this design.
what is the design size for the boiler, and could this casting set be modified to fit 12” gauge?
If so, I’d be interested also.
Thanks,
Glenn
If I recall correctly, the boiler I have is about 9" diameter
Regards,
Chuck Hackett, UP Northern 844, Mich-Cal Shay #2
Owner, MiniRail Solutions, LLC, RR Signal Systems (http://www.MiniRailSolutions.com)
"By the work, One knows the workman"
Chuck Hackett, UP Northern 844, Mich-Cal Shay #2
Owner, MiniRail Solutions, LLC, RR Signal Systems (http://www.MiniRailSolutions.com)
"By the work, One knows the workman"
Re: Mason Bogie 2-6-6T
A combination of both. My design is based on the last surviving Mason Bogie, Torch Lake here in Michigan. But If you have castings and etc still available I would be interested in purchasing them?ChuckHackett-844 wrote: ↑Mon May 16, 2022 1:25 pm"Your own" as in you are doing your own castings/fabrications, or with Rich's castings?
What pictures are you referring to? Construction was never started on the locomotive so I do not have construction pictures. I have the complete set of drawings, castings, cab kit, etc.
I have a boiler built by Ray Panel at Steam Age, Texas (now deceased) as per Rich's drawings.
Daniel.
- ChuckHackett-844
- Posts: 232
- Joined: Wed May 03, 2017 3:54 pm
- Location: Tampa, Florida
Re: Mason Bogie 2-6-6T
Yes, I still have the castings, boiler, cab kit, drawings, etc. I have an offer from someone else. If that falls through, I'll let you know.
Regards,
Chuck Hackett, UP Northern 844, Mich-Cal Shay #2
Owner, MiniRail Solutions, LLC, RR Signal Systems (http://www.MiniRailSolutions.com)
"By the work, One knows the workman"
Chuck Hackett, UP Northern 844, Mich-Cal Shay #2
Owner, MiniRail Solutions, LLC, RR Signal Systems (http://www.MiniRailSolutions.com)
"By the work, One knows the workman"
- ChuckHackett-844
- Posts: 232
- Joined: Wed May 03, 2017 3:54 pm
- Location: Tampa, Florida
Re: Mason Bogie 2-6-6T
The castings, cab kit, boiler, drawings, etc. have been sold ...
Regards,
Chuck Hackett, UP Northern 844, Mich-Cal Shay #2
Owner, MiniRail Solutions, LLC, RR Signal Systems (http://www.MiniRailSolutions.com)
"By the work, One knows the workman"
Chuck Hackett, UP Northern 844, Mich-Cal Shay #2
Owner, MiniRail Solutions, LLC, RR Signal Systems (http://www.MiniRailSolutions.com)
"By the work, One knows the workman"