Better Quality V Belts for the G 9729?

This forum is dedicated to those hobbyists with the 3-in-1 metalworking machines. Mill-Drill-Lathes. Tips, techniques, modification and use of these machines is topical.

Moderator: Harold_V

Post Reply
16WhiteColly
Posts: 56
Joined: Thu Jun 04, 2020 2:59 pm

Better Quality V Belts for the G 9729?

Post by 16WhiteColly »

Has anyone replaced the cheap Chinese V belts on the G 9729 lathe/mill? Would you happen to have replacement belt numbers?
40 year retired machinist.
Post Reply