I was recently given a set of "Loco-Notes" written by Gary Kubicek. I've searched Chaski and the web and found nothing about them. Searching is complicated by the use of the "-" in the title.
Thanks,
SteveR
I only have up to volume 3b. Are there more? Anyone remember the history of these?Loco-Notes by Gary Kubicek
Loco-Notes by Gary Kubicek
12x36 Enco Lathe, 9x42 Bridgeport, SMAW, O/A, Miller MIG w/gas, plasma
Not enough measuring tools...
1.5" Allen Models Consolidation on air.
1" FEF in progress
1" & 3/4" LE Projects
I'm thankful that metal is recyclable....
Not enough measuring tools...
1.5" Allen Models Consolidation on air.
1" FEF in progress
1" & 3/4" LE Projects
I'm thankful that metal is recyclable....
- Atkinson_Railroad
- Posts: 226
- Joined: Mon Jun 08, 2015 6:27 pm
- Location: Michigan
- Contact:
Re: Loco-Notes by Gary Kubicek
Here is what the IBLS site has about Mr. Kubicek.
http://ibls.org/mediawiki/index.php?title=Gary_Kubicek
While there is no mention of his notes, the IBLS site may be a perfect place for what you have been given.
Daris Nevil would likely be interested in adding your new-found notes to Gary's entry at the IBLS website.
You can contact him at,
daris@nevil.org
John
http://ibls.org/mediawiki/index.php?title=Gary_Kubicek
While there is no mention of his notes, the IBLS site may be a perfect place for what you have been given.
Daris Nevil would likely be interested in adding your new-found notes to Gary's entry at the IBLS website.
You can contact him at,
daris@nevil.org
John
Re: Loco-Notes by Gary Kubicek
John,
Already done. He and I were both wondering, looks like I posted first.
SteveR
Already done. He and I were both wondering, looks like I posted first.
SteveR
12x36 Enco Lathe, 9x42 Bridgeport, SMAW, O/A, Miller MIG w/gas, plasma
Not enough measuring tools...
1.5" Allen Models Consolidation on air.
1" FEF in progress
1" & 3/4" LE Projects
I'm thankful that metal is recyclable....
Not enough measuring tools...
1.5" Allen Models Consolidation on air.
1" FEF in progress
1" & 3/4" LE Projects
I'm thankful that metal is recyclable....
- Comstock-Friend
- Posts: 161
- Joined: Fri Apr 23, 2010 9:05 am
- Location: Sun Valley, California
Re: Loco-Notes by Gary Kubicek
I also have Loco-Notes 1, 1a, 2, 2a, 3, 3a and 3b. Picked these up at a LALS President's Auction. Gary had passed by the time I joined the club in the mid 70's. Cary Stewart may weigh in, he knows this history...
John
John