Here is the Hardinge DSMA making the union ferrules for the starter valves. When I timed the first few parts the hydraulic fluid was cold but after the machine warmed up it only took 1min. 50sec. to machine the part. I can see a real potential with this machine making all the small parts. The safety valves will be much easier to set as the parts will now be more consistent in size.
https://www.youtube.com/watch?v=yP3364U ... d5afJi0HZw
THE DSMA MAKING A PART
- Trainman4602
- Posts: 3482
- Joined: Sat Oct 16, 2004 9:26 pm
- Location: New Jersey
THE DSMA MAKING A PART
ALLWAYS OPERATING MY TRAIN IN A SAFE MANNER USING AUTOMATIC AIR BRAKES