Two drive wheels for Pioneer type loco?
Tread would finish at 7.5". Flange is 8" o.d. Thickness is 1".
$40 + $15 shipping in flat rate box to USA. *** SOLD ***
Two drivers.
8-3/8" rough od over flange. 7-3/4" or 7-7/8" finish. Approx 3-5/8" stroke. 13/16" thick.
$40 + $15 shipping in flat rate box to USA.
Two driver patterns.
Finish at 7" or a little less. Flange is 7-3/4" rough. Little over an inch thick. 3-1/2" or less stroke. Have screw holes and writing that indicate these were used as patterns. Note different size counterweights. These are cast iron.
$40 + $15 shipping in flat rate box to USA.
Send PM.
-Larry
1-1/2" scale driver castings
Moderators: gwrdriver, Harold_V