Suppliers of 1" Rolling Stock

This forum is dedicated to the Live Steam Hobbyist Community.

Moderators: Harold_V, WJH, cbrew

Post Reply
User avatar
tsph6500
Posts: 1393
Joined: Fri Dec 03, 2004 3:38 pm
Location: West of Dunvegan, Ontario CANADA
Contact:

Suppliers of 1" Rolling Stock

Post by tsph6500 » Sat Mar 20, 2021 6:23 pm

I am curious if there are any suppliers of 1" scale rolling stock in North America currently in business. Asking for a friend…
Best regards,
Jim Leggett

Montreal Live Steamers
www.montreallivesteamers.org

A Founding Member of the Tinkerbell Scale Society - Northern Division
I'm an A.R.S.E. (Association of Railroad Steam Engineers)
Toad Swamp & Punk Hollow Railroad - Head Tycoon
The Juvenile Traction Company - CEO & Apprentice Machinist 3rd Class
White Mountain Central RR - Engineer & Fireman

jcbrock
Posts: 443
Joined: Tue May 22, 2012 7:50 pm
Location: Oregon

Re: Suppliers of 1" Rolling Stock

Post by jcbrock » Sat Mar 20, 2021 7:01 pm

It's a good question. Pacific Design Shops has done a PFE reefer recently and I understand has plans for other products:

http://pacificdesignshops.com/

Despatch Railroad has also done flat and hopper kits as batches:

https://www.despatchrailroad.com/portfolio/

One Inch Railroad has the old Nelson Gray Mill gon listed but hasn't updated the web page in forever:

https://www.oneinchrr.com/CAT/gondola.htm

Those are the folks I know.
John Brock

User avatar
SPSteam2491
Posts: 138
Joined: Tue Feb 21, 2017 2:30 pm
Location: Mukwonago, WI

Re: Suppliers of 1" Rolling Stock

Post by SPSteam2491 » Mon Mar 22, 2021 9:08 am

Jim,
Along with the reefer cars that John posted above, we have future plans to start offering more 1" cars. Right now, we are in the designing phase of a 41' flat car with riveted sides and stake pockets modeled after a Southern Pacific F-50-16 flatcar. We just offered this in 1½" scale but was able to locate a source for 1" scale stake pockets. (See the picture attached)

Also on the designing table are 50' express reefers. The design is largely complete with just some detail parts to figure out. We are hoping to get this to the shop to cut by the end of April.
Attachments
SP F-50-16B1.jpg
Thanks
John LaFavor
Pacific Design Shops

Rob Gardner
Posts: 432
Joined: Sun Oct 23, 2005 9:27 am
Location: Newbury, OH

Re: Suppliers of 1" Rolling Stock

Post by Rob Gardner » Sat Apr 03, 2021 11:38 pm

Jim,

Backyard Trains in Denver also offers a steel gon, a low side aluminum gon, a steel flat car with wood deck and a 50' steel boxcar in 1" scale.

http://backyardtrainco.com/parts

Rob Gardner

Post Reply