Propane Front End Design

This forum is dedicated to the Live Steam Hobbyist Community.

Moderators: cbrew, Harold_V

Andy R
Posts: 441
Joined: Wed Sep 26, 2007 2:18 pm
Location: So. Calif.

Re: Propane Front End Design

Post by Andy R »

Try the Bill Morewood design for the propane burner.
Get it from Joe Tanski.
User avatar
NP317
Posts: 4557
Joined: Tue Jun 24, 2014 2:57 pm
Location: Northern Oregon, USA

Re: Propane Front End Design

Post by NP317 »

Sky:
Perhaps looking at the "Building the Raritan" book by Bill Morewood might help.
The new version available from Joe Tanski (on this Chaski web board) has a new section on making a propane burner for that 3.5" gauge locomotive.
It might be useable for your Kozo A3. Available from:
Tanski Model Engineering
8927 Notre Dame Dr.
Eden N.Y. 14057

Also consider posting a new question in the Live Steam section here titled:
"Need a propane burner design for the Kozo A3, 3/4 scale locomotive"
That should get directly to the point.
RussN
Post Reply