Another 2900 project...
Moderator: Harold_V
-
- Posts: 582
- Joined: Tue Jul 31, 2012 1:59 pm
- Location: Germany, Duesseldorf
Re: Another 2900 project...
Hello SF2900,
Your rocker is looking fine as if it were new
Outstanding achievement, thanks für posting! The pitty is, those parts will be hidden under the cab, dirty and will hardly be noticed by watchers standing around. The good thing is: You will know it' on the right place, working as intended
Those rockers are the perfect construction to provide safe and smooth running of that tall engine (just my opinion). Worked out fine with my A, too.
Carry on!
Asteamhead
Your rocker is looking fine as if it were new
Outstanding achievement, thanks für posting! The pitty is, those parts will be hidden under the cab, dirty and will hardly be noticed by watchers standing around. The good thing is: You will know it' on the right place, working as intended
Those rockers are the perfect construction to provide safe and smooth running of that tall engine (just my opinion). Worked out fine with my A, too.
Carry on!
Asteamhead
-
- Posts: 582
- Joined: Tue Jul 31, 2012 1:59 pm
- Location: Germany, Duesseldorf
Re: Another 2900 project...
Hello SF2900,
Watching your progress with great interest
Please keep on posting about your giant project!
All the best by Asteamhead
Watching your progress with great interest
Please keep on posting about your giant project!
All the best by Asteamhead
-
- Posts: 463
- Joined: Sun Oct 23, 2005 9:27 am
- Location: Newbury, OH
Re: Another 2900 project...
Woof!
Those are some big, beefy Buckeyes!
Rob Gardner
Those are some big, beefy Buckeyes!
Rob Gardner
-
- Posts: 1573
- Joined: Thu Apr 26, 2012 10:15 am
- Location: Tennessee, USA
Re: Another 2900 project...
That's impressive!
Re: Another 2900 project...
that pump is really nice!! Those are from the castings that eccentric engineer now has?
Re: Another 2900 project...
Yes, EE now owns the tooling/molds for the Westinghouse Cross Compound Air Compressor. We have several and will be posting two of them for sale (fully assembled) in a month or so. These are dummy units and not designed to function. Tried to be as faithful to the prototype as possible. Doubtful the sheet metal covers will be made for the top cylinder. I think it looks better without it.