Do you have any youtube users you follow?
Moderator: Harold_V
Do you have any youtube users you follow?
I have several youtube pa1ges I go to to get interesting and useful machining tips.
You probably know of Tubal Cain:
https://www.youtube.com/user/mrpete222/videos
and of course, our own trainman Dave:
https://www.youtube.com/user/trainman4602/videos
Here's two others I like:
https://www.youtube.com/user/Halligan142/videos
https://www.youtube.com/user/Figbash3/videos
I like downloading them to my tablet so that I can have something useful to watch when I'm stuck in an airport or just hanging around the shop.
Anyone else have any?
I'm not looking for specific individual videos, but users that post interesting stuff on machining.
Steve
You probably know of Tubal Cain:
https://www.youtube.com/user/mrpete222/videos
and of course, our own trainman Dave:
https://www.youtube.com/user/trainman4602/videos
Here's two others I like:
https://www.youtube.com/user/Halligan142/videos
https://www.youtube.com/user/Figbash3/videos
I like downloading them to my tablet so that I can have something useful to watch when I'm stuck in an airport or just hanging around the shop.
Anyone else have any?
I'm not looking for specific individual videos, but users that post interesting stuff on machining.
Steve
Re: Do you have any youtube users you follow?
This is the man IMO. Tom Lipton from oxtoolco.
https://www.youtube.com/channel/UCZC9LG ... T4OZne-JNw
I also follow many others:
https://www.youtube.com/channel/UCw3UZn ... H3R6C3Gcng
https://www.youtube.com/channel/UCDmxnP ... QATIkfgY2Q
https://www.youtube.com/channel/UC5iubx ... UQTrz4-CXw
I even have my own youtube channel where you might find things interesting. Check it out in my sig.
https://www.youtube.com/channel/UCZC9LG ... T4OZne-JNw
I also follow many others:
https://www.youtube.com/channel/UCw3UZn ... H3R6C3Gcng
https://www.youtube.com/channel/UCDmxnP ... QATIkfgY2Q
https://www.youtube.com/channel/UC5iubx ... UQTrz4-CXw
I even have my own youtube channel where you might find things interesting. Check it out in my sig.
Steve
Check out http://www.youtube.com/MyShopNotes on YouTube.
Check out http://www.youtube.com/MyShopNotes on YouTube.
Re: Do you have any youtube users you follow?
Ox's videos are good, but his titles don't tell you anything about the topic, so it's hard to know what you are getting until you are watching it.
Steve
Steve
Re: Do you have any youtube users you follow?
Oxtools is a good one but Tom can waft on a bit at times - still doesnts stop me watching his videos - lately he is getting some nice stuff from his viewers hey!
I also subscribe to Tom's Techniques:
https://www.youtube.com/channel/UCqR9wR ... pqiN8C0dIg
And ThatLazyMachninist - he explains things very nicely:
https://www.youtube.com/channel/UCOfQ4U ... B3h9VieY1Q
Another interesting one that has nothign to do with machining is Taras Kul - half of his videos are just science experiments but he has some great life hacks that even has my wife subscribing to him now - Check out how to cut a dozen small tomatoes on one go, or how to cut a watermelon so it doesnt mess your face....
https://www.youtube.com/channel/UCkDbLi ... ZuyW9sZK1g
I also subscribe to Tom's Techniques:
https://www.youtube.com/channel/UCqR9wR ... pqiN8C0dIg
And ThatLazyMachninist - he explains things very nicely:
https://www.youtube.com/channel/UCOfQ4U ... B3h9VieY1Q
Another interesting one that has nothign to do with machining is Taras Kul - half of his videos are just science experiments but he has some great life hacks that even has my wife subscribing to him now - Check out how to cut a dozen small tomatoes on one go, or how to cut a watermelon so it doesnt mess your face....
https://www.youtube.com/channel/UCkDbLi ... ZuyW9sZK1g
-
- Posts: 2938
- Joined: Sun Jun 27, 2010 10:43 pm
- Location: pendleton or
Re: Do you have any youtube users you follow?
awile back I was garnering info on rebuild a couple maytags I bought as a pile of parts. some old hillbilly had a ton of vids on repair and rebuilding. plus cooking tips like fried bologna sandwiches. go figure
Re: Do you have any youtube users you follow?
(ALL)
The King Of Random
Grant Thompson (An Absolutely, Sensible and Fantastic Mind)
https://www.youtube.com/user/01032010814/videos
- - -
Marc L'Ecuyer is,
That Lazy Machinist
(This Guy is an Amazing Instructor)
http://www.thatlazymachinist.com/
Ken. Add/Edit on 03-30-2015
The King Of Random
Grant Thompson (An Absolutely, Sensible and Fantastic Mind)
https://www.youtube.com/user/01032010814/videos
- - -
Marc L'Ecuyer is,
That Lazy Machinist
(This Guy is an Amazing Instructor)
http://www.thatlazymachinist.com/
Ken. Add/Edit on 03-30-2015
One must remember.
The best learning experiences come
from working with the older Masters.
Ken.
The best learning experiences come
from working with the older Masters.
Ken.
Re: Do you have any youtube users you follow?
BlondiHacks is entertaining and Joe Pie is a virtual genius.
Re: Do you have any youtube users you follow?
Joe Pie comes up with lots of helpful tips on how to do stuff easier and faster.
https://www.youtube.com/channel/UCpp6lg ... a5w/videos
Robin Renzetti has some interesting stuff. Very high-precision work.
Check out his Renzetti blocks - they make 123 blocks look like a bad joke.
https://www.youtube.com/user/ROBRENZ/videos
This Old Tony is easily the funniest machinist on youtube:
https://www.youtube.com/user/featony/videos
Stefan Gotteswinter is another one skiled at high-precision wirk.
https://www.youtube.com/user/syyl/videos
John Saunders started out with a CNC sherline or something like that in his apartment in New York.
He now has a large CNC machine shop in Ohio.
https://www.youtube.com/user/saunixcomp/videos
Steve
Re: Do you have any youtube users you follow?
Using the equipment is obviously helpful. Understanding what it's alignments should be and how to actually test what you have can either tell you what might not be operator error or allow compensations and adjustments to be made. This guy while at the home shop level is very close to a professional status. https://www.youtube.com/channel/UCD1jVj ... PHw/videos. Also https://www.youtube.com/channel/UCvExaD ... gqcRVmdZyQ
While it's about testing and aligning a cnc bed mill almost all of the checks are applicable to most mill types in one way or another. https://www.youtube.com/watch?v=4HWuhbhySpw&t=4s It's a 9 part series well worth watching for anyone with a mill.
Most of the better manufacturers also have a YT channel. For metrolgy both Mitutoyo and Starrett have past videos where a lot can be learned. And I'm surprised Oxtool (Tom Lipton) hasn't been mentioned yet. https://www.youtube.com/user/oxtoolco/videos
While it's about testing and aligning a cnc bed mill almost all of the checks are applicable to most mill types in one way or another. https://www.youtube.com/watch?v=4HWuhbhySpw&t=4s It's a 9 part series well worth watching for anyone with a mill.
Most of the better manufacturers also have a YT channel. For metrolgy both Mitutoyo and Starrett have past videos where a lot can be learned. And I'm surprised Oxtool (Tom Lipton) hasn't been mentioned yet. https://www.youtube.com/user/oxtoolco/videos
- tornitore45
- Posts: 2078
- Joined: Tue Apr 18, 2006 12:24 am
- Location: USA Texas, Austin
Re: Do you have any youtube users you follow?
I responded just to get update on this thread.
Mauro Gaetano
in Austin TX
in Austin TX