Hello, New here

Topics include, Machine Tools & Tooling, Precision Measuring, Materials and their Properties, Electrical discussions related to machine tools, setups, fixtures and jigs and other general discussion related to amateur machining.

Moderators: GlennW, Harold_V

Post Reply
MarkWarrec019
Posts: 3
Joined: Fri May 28, 2021 8:45 am
Contact:

Hello, New here

Post by MarkWarrec019 »

Hello everyone,
I'm new here
Want to learn and explore new ideas and from experiences! :)
User avatar
Harold_V
Posts: 20231
Joined: Fri Dec 20, 2002 11:02 pm
Location: Onalaska, WA USA

Re: Hello, New here

Post by Harold_V »

Welcome to the board. Lots of great experience here to help you in your quest.

H
Wise people talk because they have something to say. Fools talk because they have to say something.
Kay_B
Posts: 24
Joined: Wed Mar 17, 2021 11:28 am

Re: Hello, New here

Post by Kay_B »

Hey! I am also here recently, but have already managed to find a lot of useful information. I think you will find this forum useful too.
User avatar
NP317
Posts: 4557
Joined: Tue Jun 24, 2014 2:57 pm
Location: Northern Oregon, USA

Re: Hello, New here

Post by NP317 »

Welcome MW019.
What subjects offered here are of your primary interest?
Machining, live steam... ?
Location?
Enjoy and learn.
RussN
User avatar
Harold_V
Posts: 20231
Joined: Fri Dec 20, 2002 11:02 pm
Location: Onalaska, WA USA

Re: Hello, New here

Post by Harold_V »

MarkWarrec019 wrote: Fri Jun 11, 2021 1:58 am Hello everyone,
I'm new here
Want to learn and explore new ideas and from experiences! :)
One comment.

This will be your one and only warning. If you violate our policy of "NO SPAM" again, you're gone from this board.

There is a place on this board for you to advertise your wares, assuming they are related to the board topics.

You inserted a post that has no relevance to our topics, all in the effort to promote a chain saw. It has been deleted. Please do not post such things on this board.

Harold (moderator)
Wise people talk because they have something to say. Fools talk because they have to say something.
User avatar
NP317
Posts: 4557
Joined: Tue Jun 24, 2014 2:57 pm
Location: Northern Oregon, USA

Re: Hello, New here

Post by NP317 »

I was wondering about that odd post...
RussN
Post Reply