metal shaper casting
Moderator: Harold_V
metal shaper casting
I have a 6 x 18 craftsman metal lathe. I would like to trade for castings to build a gingery shaper. thank you. steve c.
- steamin10
- Posts: 6712
- Joined: Sun Jun 08, 2003 11:52 pm
- Location: NW Indiana. Close to Lake Michigan S. tip
Re: metal shaper casting
I saw your original post. It took me some time to respond. I think there are 5 major pcs to this small project. Do you have the weight in aluminum castings material to cover it? Bell housings, wheels or similar auto parts of fairly clean metal? I do most of my casting in Petro.. I have larger flasks from a commercial foundry, and use a #16 crucible. I need an excuse to drag out my equipment and finish its setup. . Contact me on the personal message board here and we can talk some.
Big Dave, former Millwright, Electrician, Environmental conditioning, and back yard Fixxit guy. Now retired, persuing boats, trains, and broken relics.
We have enough youth, how about a fountain of Smart. My computer beat me at chess, but not kickboxing
It is not getting caught in the rain, its learning to dance in it. People saying good morning, should have to prove it.
We have enough youth, how about a fountain of Smart. My computer beat me at chess, but not kickboxing
It is not getting caught in the rain, its learning to dance in it. People saying good morning, should have to prove it.
Re: metal shaper casting
You could melt down your craftsman lathe?
Sent from my iPhone using Tapatalk Pro
Sent from my iPhone using Tapatalk Pro