This guy is amazing! All done with ordinary hobby tools.
http://homepage3.nifty.com/amigos/index-e.html
Ed
Minilathe Web Site
Moderator: JackF
Minilathe Web Site
Vectrax 14x40 lathe, Enco RF-45 clone mill, MillerMatic 180 MIG.
Re: Minilathe Web Site
Hi! Ed,
Thanks, for this GREAT SITE FIND
It took me THREE YEARS but I found it.
This guy does amazing work for sure.
Ken.
Thanks, for this GREAT SITE FIND
It took me THREE YEARS but I found it.
This guy does amazing work for sure.
Ken.
One must remember.
The best learning experiences come
from working with the older Masters.
Ken.
The best learning experiences come
from working with the older Masters.
Ken.
Re: Minilathe Web Site
Ed,
Ditto Ken on the thanks, this is a great site.
Jack.
Ditto Ken on the thanks, this is a great site.
Jack.
Re: Minilathe Web Site
I have been reading on this site for a few years. He has a lot of good stuff for the new guy. I wish he would up date it has been while.
- Adirondack
- Posts: 410
- Joined: Tue Aug 23, 2011 6:59 pm
- Location: southern CT
Re: Minilathe Web Site
Original site is dead, but still available via the Wayback Machine.EdK wrote: ↑Tue May 18, 2010 4:38 pm This guy is amazing! All done with ordinary hobby tools.
http://homepage3.nifty.com/amigos/index-e.html
Ed
https://web.archive.org/web/20150316110 ... dex-e.html
Adirondack Car & Foundry
Check out our projects: https://www.facebook.com/ADKrail/
Visit our ALL-NEW online store: https://adirondackcarfoundry.square.site/
A little locomotive with 4 wheels on the track is a lot more fun
than a 1/2 finished one with 16 wheels on the bench!
Check out our projects: https://www.facebook.com/ADKrail/
Visit our ALL-NEW online store: https://adirondackcarfoundry.square.site/
A little locomotive with 4 wheels on the track is a lot more fun
than a 1/2 finished one with 16 wheels on the bench!