Kerosene Headlight Chimney ****CURRENTLY AVAILABLE****
Moderators: gwrdriver, Harold_V
Kerosene Headlight Chimney ****CURRENTLY AVAILABLE****
#1 Post by daves1459 » February 2nd, 2021, 6:09 pm
I recently had some 1 1/2" scale kerosene headlight chimneys custom glass blown for my current project. I have a few spares available at $28 each including Priority postage to the continental USA.
A drawing is below. I had them made for a kerosene headlight. But I also used them for the electric headlight on my Disney 4-4-0. The chimney will accept a G4 12volt LED bulb as shown. The G4 is very bright as can be seen in the photo. The bulb socket is round plastic so can be pushed into the same base that holds the chimney. A small piece of heat shrink tubing can be used to cover up the micro-electronics in the bulb base.
The glass used was laboratory grade tubing so should take any heat from electric bulb or flame..
I think the chimneys could be used for a 2 1/2" scale kerosene lamp for cab lighting or other.
Anyway if anyone has an interest please PM me.
Dave
A discussion concerning this topic can be found here: viewtopic.php?f=45&t=110324
I recently had some 1 1/2" scale kerosene headlight chimneys custom glass blown for my current project. I have a few spares available at $28 each including Priority postage to the continental USA.
A drawing is below. I had them made for a kerosene headlight. But I also used them for the electric headlight on my Disney 4-4-0. The chimney will accept a G4 12volt LED bulb as shown. The G4 is very bright as can be seen in the photo. The bulb socket is round plastic so can be pushed into the same base that holds the chimney. A small piece of heat shrink tubing can be used to cover up the micro-electronics in the bulb base.
The glass used was laboratory grade tubing so should take any heat from electric bulb or flame..
I think the chimneys could be used for a 2 1/2" scale kerosene lamp for cab lighting or other.
Anyway if anyone has an interest please PM me.
Dave
A discussion concerning this topic can be found here: viewtopic.php?f=45&t=110324
-
- Posts: 3
- Joined: Sun Feb 07, 2021 12:20 am
- Location: Merrimack, NH
Re: Kerosene Headlight Chimney
Dave
Are any of these still available? Thanks.
Are any of these still available? Thanks.
Re: Kerosene Headlight Chimney
Yes, I have several. How can I help?
Dave
Dave
-
- Posts: 3
- Joined: Sun Feb 07, 2021 12:20 am
- Location: Merrimack, NH
Re: Kerosene Headlight Chimney
I'd like to purchase two chimneys
Re: Kerosene Headlight Chimney
All kerosene headlight chimneys are sold. Chimneys sold out!
Dave
Dave
Re: Kerosene Headlight Chimney ****SOLD****
I continue to get requests for the chimneys. If I can get orders for 6 chimneys, I'll make more. So far I have requests for 2.
Dave
Dave
-
- Posts: 302
- Joined: Mon Jan 21, 2013 8:35 am
- Location: Pittsburgh, PA
Re: Kerosene Headlight Chimney ****SOLD****
Hello, I’ll take 2 if they are made available. Maybe 4 so I can have spares. I’m clumsy
They look to be perfect for my 2.5” scale 14” oil headlights for my shay.
Thanks
Brian
They look to be perfect for my 2.5” scale 14” oil headlights for my shay.
Thanks
Brian
Re: Kerosene Headlight Chimney ****SOLD****
I now have requests for four chimneys. If I can get requests for two more I'll have more chimneys made. Any takers?
Dave
Dave
Re: Kerosene Headlight Chimney ****SOLD****
Please put me down for one if there are any left.
Al
Al
Re: Kerosene Headlight Chimney ****SOLD****
Thanks!
Payment sent!
Payment sent!