titanium sheet

Sheet Metal Fabrication techniques, questions and help. "Tricks of the Trade"

Moderators: GlennW, Harold_V

Post Reply
wally318
Posts: 260
Joined: Sun Jun 05, 2011 1:06 am
Location: Kelowna, British Columbia

titanium sheet

Post by wally318 »

Anyone here work with titanium sheet?
Looking to find some strips of .050" 3-2.5 or 6-4.
Anyone have some bits of this lying around, or point me
to a source where I can get a small quantity. Thanks.
theg8nw
Posts: 137
Joined: Fri Oct 29, 2010 4:34 am
Location: South Bend, IN
Contact:

Re: titanium sheet

Post by theg8nw »

Have you tried McMaster-Carr, I know they carry it but it looks like no 0.050 . Here there page. http://www.mcmaster.com/#standard-titan ... ts/=kmjiei

Or metalsonline http://www.onlinemetals.com/merchant.cf ... p_cat=1353 has it in 0.050

good luck..

John
Plan your work, work your plan.
www.measurementandmachine.com
redneckalbertan
Posts: 1274
Joined: Thu Nov 01, 2012 10:39 am
Location: South Central Alberta

Re: titanium sheet

Post by redneckalbertan »

Save all your filings from that stuff!
Post Reply