Welding helmet

Welding Techniques, Theory, Machines and Questions.

Moderators: Harold_V, Scott

User avatar
GlennW
Posts: 6989
Joined: Sun Apr 15, 2007 9:23 am
Location: Florida

Re: Welding helmet

Post by GlennW » Tue May 25, 2021 5:12 am

BigDumbDinosaur wrote:
Mon May 24, 2021 3:34 pm
I swear by Jackson helmets. I've had the same one since the 1970s and have never had anything on it break. I'm old-fashioned and don't use auto-darkening helmets. I don't trust the technology and value what little eyesight I have left.
I'm in the same camp...

I've never found it difficult doing it the "old" way, but I basically only do TIG welding and very seldom MIG.
Glenn

Operating machines is perfectly safe......until you forget how dangerous it really is!

User avatar
liveaboard
Posts: 1520
Joined: Sun Dec 08, 2013 1:40 pm
Location: southern Portugal
Contact:

Re: Welding helmet

Post by liveaboard » Tue May 25, 2021 7:28 am

the nod helmet is ok for rough work; but when you need to get the electrode on a small point, it's difficult.
After years of practice, I became fairly good at that.
Then the autodark helmet came, and that acquired skill became redundant.

Still, I resisted for a long time, because they were expensive at first, and also I was working on boats in the water, and there was wind.
I said I'll buy one when they're waterproof and they float.
Many tools I used at that time became wet.
Permanently.

jcfx
Posts: 575
Joined: Sun Aug 09, 2009 1:24 pm
Location: NY

Re: Welding helmet

Post by jcfx » Tue May 25, 2021 7:24 pm

It depends on what you want to spend, name brands will cost you more versus the low end and they all do
what they're supposed to do, protect your eyes.
I started out with a HF $70.00 welding helemt, it does what it supposed to do ( not blind or have any cataracts ;) )
and personally looking to upgrade to something that has a wider view and less blocky.
The 3M speedglas and the ESAB Sentinel are what I'm leaning towards.
Buy once, cry once as the saying goes.

User avatar
BadDog
Posts: 5102
Joined: Wed May 17, 2006 8:21 pm
Location: Phoenix, AZ

Re: Welding helmet

Post by BadDog » Wed May 26, 2021 4:37 pm

If you watch for a bit, you can get a Speedglass for pretty reasonable money. I've got one I use only for Tig and Plasma cutting and sometimes for O/A. I've got a cheaper autodark helmet I use for MIG, and welding overhead.
Russ
Master Floor Sweeper

Kay_B
Posts: 24
Joined: Wed Mar 17, 2021 11:28 am

Re: Welding helmet

Post by Kay_B » Wed Jun 02, 2021 5:17 am

A lot of useful information. Thanks for your answers guys! I have something to think about before making a choice.

Glenn Brooks
Posts: 2493
Joined: Mon Nov 10, 2014 1:39 pm
Location: Woodinville, Washington

Re: Welding helmet

Post by Glenn Brooks » Fri Jun 04, 2021 10:32 am

Miller makes some nice helmets. They have a sale going on now.

One thing to look for is a helmet that can be adjustable away from your face - headband adjustment on the sides where it attaches to the helmet. Helps keep the inside from fogging up, if you move the helmet away from your mouth and nose a little bit.

Also the newer helmets have wider field of view, better optics, and allow for wearing a small respirator. Nice features.

Glenn
Moderator - Grand Scale Forum

Motive power : 1902 A.S.Campbell 4-4-0 American - 12 5/8" gauge, 1955 Ottaway 4-4-0 American 12" gauge

Ahaha, Retirement: the good life - drifting endlessly on a Sea of projects....

User avatar
liveaboard
Posts: 1520
Joined: Sun Dec 08, 2013 1:40 pm
Location: southern Portugal
Contact:

Re: Welding helmet

Post by liveaboard » Fri Jun 04, 2021 11:11 am

If you can't see the weld clearly, you probably forgot to put on your glasses before putting on the helmet.

At least, that's what happens to me...

318J
Posts: 38
Joined: Mon Apr 04, 2016 3:27 pm
Location: Meramec Valley, MO

Re: Welding helmet

Post by 318J » Thu Jun 10, 2021 8:38 am

Fibre Metal pipeliner hood is my recommendation. Lightweight, easily modified, and durable. I've heavily used and abused mine daily for years. Some people don't like the small 2" x 4.25" lens however. Tradesman makes a decent auto darkening lens in that size too.
-Sam
Railroad Boilermaker
"Preserving the Past and Ensuring Our Future"

Patio
Posts: 1338
Joined: Wed Oct 06, 2010 3:14 pm
Location: Centralia Wa

Re: Welding helmet

Post by Patio » Fri Jun 11, 2021 12:13 am

You guys might find this interesting.
https://www.youtube.com/watch?v=qMyeVXuElkQ

Be advised. This video is filled with profanity.

H
Live for the moment!
Prepare for tomorrow!
Forgive the past!

Post Reply