At R.L.S. we use hand tampers, the pneumatic tamper posted earlier and a mechanical tamper.
Brook
The mechanical tamper has rows of tines that go on either side of the ties and wiggle front to back pushing the ballast pretty evenly under the ties.Search found 244 matches
- Thu Mar 17, 2022 10:37 am
- Forum: Live Steam
- Topic: tie work
- Replies: 67
- Views: 41550
- Mon Feb 28, 2022 8:19 pm
- Forum: Live Steam
- Topic: New Challenger photo
- Replies: 13
- Views: 9361
Re: New Challenger photo
A few more photos of the Moore Challenger from 2013 Here we see David and Jim Kreider standing behind the engine: Jan 20_011.JPG David doing a little prep work. The plate with the two bolts sticking up on the steaming bay next to the Challenger is an extension plate because the loco and tender are j...
- Mon Feb 28, 2022 7:58 pm
- Forum: Live Steam Marketplace
- Topic: Next batch of EE Injectors
- Replies: 16
- Views: 12167
Re: Next batch of EE Injectors
Thanks for the update Anthony!!
Brook
Brook
- Sun Feb 27, 2022 8:38 am
- Forum: Live Steam
- Topic: New Challenger photo
- Replies: 13
- Views: 9361
Re: New Challenger photo
Hi Asteamhead, I will pass along your compliment as the engine was built and owned by David Moore. He is a member of the Riverside live Steamers which is where the loco currently lives. David has been building since 1964 and has a website listing the castings he sells: http://www.dmprototypes.com/ B...
- Fri Feb 25, 2022 12:36 pm
- Forum: Live Steam
- Topic: New Challenger photo
- Replies: 13
- Views: 9361
Re: New Challenger photo
That I don't know.
- Thu Feb 24, 2022 7:54 pm
- Forum: Live Steam
- Topic: New Challenger photo
- Replies: 13
- Views: 9361
Re: New Challenger photo
Hi Berkman, David Moore's Challenger is finished and propane fired. Here it is on the steaming bays at R.L.S. with David doing work 9/2017 Moore_challenger_01.JPG These two shots are from 12/2018 at R.L.S. - Mark Spaulding is at the throttle with David sitting behind him. Moore_challenger_02.JPG Moo...
- Tue Feb 15, 2022 10:49 pm
- Forum: Build Log
- Topic: An homemade steam donkey
- Replies: 50
- Views: 35832
- Fri Jan 21, 2022 10:40 am
- Forum: Live Steam
- Topic: 2022 Standard Injector Update
- Replies: 17
- Views: 10287
Re: 2022 Standard Injector Update
Anthony - Thanks for the update.
- Mon Jan 17, 2022 1:03 pm
- Forum: Live Steam
- Topic: 1.5" Scale Boiler Manufacturers
- Replies: 42
- Views: 26510
Re: 1.5" Scale Boiler Manufacturers
Ah... didn't think about siphon tubes. Thanks!
- Mon Jan 17, 2022 11:10 am
- Forum: Live Steam
- Topic: 1.5" Scale Boiler Manufacturers
- Replies: 42
- Views: 26510
Re: 1.5" Scale Boiler Manufacturers
cbrew, are the threaded plugs in the firebox cleanouts or fusible plugs?
Brook
Brook
- Fri Nov 19, 2021 10:13 am
- Forum: Live Steam
- Topic: Stainless Steel Model Bolts?
- Replies: 17
- Views: 6988
Re: Stainless Steel Model Bolts?
I haven't bought from them but Micro Fasteners has some listed on their website: https://www.microfasteners.com/home.php?cat=576
Brook
Brook
- Mon Nov 01, 2021 7:50 am
- Forum: Live Steam
- Topic: T-shaped brass
- Replies: 4
- Views: 2571
Re: T-shaped brass
PM Research has a 3/16" tee: https://www.pmmodelengines.com/shop/mat ... ape-brass/