X-axis feed for Select 6x26 mill.

Discussion on all milling machines vertical & horizontal, including but not limited to Bridgeports, Hardinge, South Bend, Clausing, Van Norman, including imports.

Moderators: GlennW, Harold_V

Post Reply
Davisa
Posts: 7
Joined: Mon Jan 16, 2023 11:21 pm

X-axis feed for Select 6x26 mill.

Post by Davisa »

Does anyone have any info on which axis feed will fit on a Select 6 x 26 Taiwan mill? I've had it for over a year and it's time to upgrade it.
Any info would be greatly appreciated.
Davisa
wally318
Posts: 260
Joined: Sun Jun 05, 2011 1:06 am
Location: Kelowna, British Columbia

Re: X-axis feed for Select 6x26 mill.

Post by wally318 »

Take a look at my thread Rockwell milling machine rebuild @ top of page.
Look at page 3 & 4 . Should give you some ideas.
Every power feed will require a certain amount of adaptation.
Last edited by rmac on Tue Jan 24, 2023 8:55 pm, edited 1 time in total.
Reason: Added link to the other thread
User avatar
Bill Shields
Posts: 10459
Joined: Fri Dec 21, 2007 4:57 am
Location: 39.367, -75.765
Contact:

Re: X-axis feed for Select 6x26 mill.

Post by Bill Shields »

As much as you may not to want to go this direction, but Servo feeds provide the most comprehensive data for installation dimensions.

They are also the most $, but have been around for decades and provide parts and service you may not get from others.
Too many things going on to bother listing them.
Post Reply