I just purchased the 3 molds that serviced (survived?) the fire. I have the other 2 parts drawn up. I need to find someone that can sink the molds for me.
Thanks
Tim
Power Models 11” Westinghouse Pump
-
- Posts: 1600
- Joined: Sun Jan 05, 2003 8:47 am
- Location: Florida, on the Lake Wales Ridge
Power Models 11” Westinghouse Pump
He who dies with the most unfinished projects: Should of put more time into their hobby.
Re: Power Models 11” Westinghouse Pump
Doug Edwards (a board reader) is a specialist in mold making.
H
H
Wise people talk because they have something to say. Fools talk because they have to say something.
Re: Power Models 11” Westinghouse Pump
Hard to tell what you have there. What’s inside the silver boxes?
Dan Watson
Chattanooga, TN
Chattanooga, TN
-
- Posts: 1600
- Joined: Sun Jan 05, 2003 8:47 am
- Location: Florida, on the Lake Wales Ridge
Re: Power Models 11” Westinghouse Pump
They are the 3 aluminum molds for the parts I have.
Tim
He who dies with the most unfinished projects: Should of put more time into their hobby.
- gwerhart0800
- Posts: 225
- Joined: Wed Feb 27, 2008 11:02 pm
- Location: Loveland, CO USA
Re: Power Models 11” Westinghouse Pump
Molds to make waxes for investment casting?
George Erhart
Loveland, CO
https://lovelandcreatorspace.com
Loveland, CO
https://lovelandcreatorspace.com
- Dick_Morris
- Posts: 2855
- Joined: Sat Jan 04, 2003 2:09 pm
- Location: Anchorage, AK
Re: Power Models 11” Westinghouse Pump
A lot of the PMS patterns and molds were at the foundry and weren't affected by the fire. After the fire they were sold on Ebay. I have some push pole pocket and queen post patterns for sand casting from there.