Highline Videos
- tsph6500
- Posts: 1417
- Joined: Fri Dec 03, 2004 3:38 pm
- Location: West of Dunvegan, Ontario CANADA
- Contact:
Highline Videos
I'll get this train rolling… jump on if this interests you… Highline Videos.
Post your own or post ones you find online. It's easy to set-up notifications so you will know whenever there's been a new post on this thread. Click on the YouTube logo or the direct link to get the fullscreen higher resolution version.
Try and stay on topic.
To start off, here's one of mine filmed in 2015 @ the Montreal LS. I hope you enjoy it.
The 4-8-4 Northern is mine, built by my grandfather, Jim Turnbull, in 1942. Steven Di Carlo is on the throttle. The green engine is Keith Wood with his 10-wheeler built by Bill Van Brocklin.
Side note: the 1-1/2" 4-6-0 is a "Turnbull" 10-wheeler built in 1972 and the engineer is "Frank THe Train" Desaulniers.
https://youtu.be/auFn3ZFQYcY
Post your own or post ones you find online. It's easy to set-up notifications so you will know whenever there's been a new post on this thread. Click on the YouTube logo or the direct link to get the fullscreen higher resolution version.
Try and stay on topic.
To start off, here's one of mine filmed in 2015 @ the Montreal LS. I hope you enjoy it.
The 4-8-4 Northern is mine, built by my grandfather, Jim Turnbull, in 1942. Steven Di Carlo is on the throttle. The green engine is Keith Wood with his 10-wheeler built by Bill Van Brocklin.
Side note: the 1-1/2" 4-6-0 is a "Turnbull" 10-wheeler built in 1972 and the engineer is "Frank THe Train" Desaulniers.
https://youtu.be/auFn3ZFQYcY
Best regards,
Jim Leggett
Montreal Live Steamers
www.montreallivesteamers.org
A Founding Member of the Tinkerbell Scale Society - Northern Division
I'm an A.R.S.E. (Association of Railroad Steam Engineers)
Toad Swamp & Punk Hollow Railroad - Head Tycoon
The Juvenile Traction Company - CEO & Apprentice Machinist 3rd Class
White Mountain Central RR - Engineer & Fireman
Jim Leggett
Montreal Live Steamers
www.montreallivesteamers.org
A Founding Member of the Tinkerbell Scale Society - Northern Division
I'm an A.R.S.E. (Association of Railroad Steam Engineers)
Toad Swamp & Punk Hollow Railroad - Head Tycoon
The Juvenile Traction Company - CEO & Apprentice Machinist 3rd Class
White Mountain Central RR - Engineer & Fireman
Re: Highline Videos
Jim you guys really have a great high line. I found this and think this and part 2 from Waushakum in 1985 are the ultimate high line videos of all time, complete with traffic congestion! Has George Dimond in it too!
https://www.youtube.com/watch?v=aOchl9zyMJQ https://www.youtube.com/watch?v=OG0liNn_1eA&t=15s
https://www.youtube.com/watch?v=aOchl9zyMJQ https://www.youtube.com/watch?v=OG0liNn_1eA&t=15s
Re: Highline Videos
Here's a trip around the NJLS High-line in ~2010 on what was then my Ralph Francis Hudson, which is now in the care & custody of a club member at MLS. https://youtu.be/-q78NqiON1c
Re: Highline Videos
Here are a couple of videos showing my CPR Hudson #2888 steaming at the MLS and the GHLS track in Les Cedres and Hamilton, respectively.
https://www.youtube.com/watch?v=nKi50vtGap4
https://www.youtube.com/watch?v=7sFIz8778_Q
Enjoy, Wolfgang
https://www.youtube.com/watch?v=nKi50vtGap4
https://www.youtube.com/watch?v=7sFIz8778_Q
Enjoy, Wolfgang
Re: Highline Videos
Jim,
Is there a map somewhere of the tracks at MLS? I try following along and can't quite fit all the curves and other lines together to make sense of it.
Is there a map somewhere of the tracks at MLS? I try following along and can't quite fit all the curves and other lines together to make sense of it.
-ken cameron
Syracuse Model Railroad Club http://www.SyracuseModelRr.org/
CNY Modelers http://www.cnymod.com/
Finger Lakes Live Steamers http://www.fingerlakeslivesteamers.org/
Member JMRI Developer Team http://www.jmri.org/
mailto: kcameron@twcny.rr.com
In the Upstate New York US area of the world
Syracuse Model Railroad Club http://www.SyracuseModelRr.org/
CNY Modelers http://www.cnymod.com/
Finger Lakes Live Steamers http://www.fingerlakeslivesteamers.org/
Member JMRI Developer Team http://www.jmri.org/
mailto: kcameron@twcny.rr.com
In the Upstate New York US area of the world
- tsph6500
- Posts: 1417
- Joined: Fri Dec 03, 2004 3:38 pm
- Location: West of Dunvegan, Ontario CANADA
- Contact:
Re: Highline Videos
Hi Ken,
Here's a layout from the proposal back in 1999. It's not drawn to scale, the steaming bay layout is not like this, there are now enginehouses (not shown) and there is no pedestrian bridge.
The mainline is approximately 1370-feet long.
The layout can be run in either direction, preferably not at the same time. First train out determines the direction.
Best regards,
Jim Leggett
Montreal Live Steamers
www.montreallivesteamers.org
A Founding Member of the Tinkerbell Scale Society - Northern Division
I'm an A.R.S.E. (Association of Railroad Steam Engineers)
Toad Swamp & Punk Hollow Railroad - Head Tycoon
The Juvenile Traction Company - CEO & Apprentice Machinist 3rd Class
White Mountain Central RR - Engineer & Fireman
Jim Leggett
Montreal Live Steamers
www.montreallivesteamers.org
A Founding Member of the Tinkerbell Scale Society - Northern Division
I'm an A.R.S.E. (Association of Railroad Steam Engineers)
Toad Swamp & Punk Hollow Railroad - Head Tycoon
The Juvenile Traction Company - CEO & Apprentice Machinist 3rd Class
White Mountain Central RR - Engineer & Fireman
-
- Posts: 114
- Joined: Mon Sep 03, 2007 10:19 pm
- Location: Creston Iowa
Re: Highline Videos
Here are a couple of the Iowa Model Steam Engineers. The 1" 060 is dad's and the 280 was mine.
Wayne
https://youtu.be/Vhel_21ZV48
https://youtu.be/WoYQK1q1y9M
Wayne
https://youtu.be/Vhel_21ZV48
https://youtu.be/WoYQK1q1y9M
Re: Highline Videos
Jim M. running my camelback.
https://youtu.be/fzB4PhTg7Gg
Me running Jim’s New Haven I-1 Pacific
https://youtu.be/3ZPy9-Jcmvw
Sharing is a BIG part of the fun!
Keith
https://youtu.be/fzB4PhTg7Gg
Me running Jim’s New Haven I-1 Pacific
https://youtu.be/3ZPy9-Jcmvw
Sharing is a BIG part of the fun!
Keith
YouTube Videos
How do you embed a YouTube Video?
When I try all I get is a link inside the YouTube quotes after pressing the YouTube button.
When I try all I get is a link inside the YouTube quotes after pressing the YouTube button.
Re: YouTube Videos
Easy!
Code: Select all
https://youtu.be/fzB4PhTg7Gg
[youtube]fzB4PhTg7Gg[/youtube]
Note that I have used code so you can see how the text is entered. If I didn't use it, the link would be activated and you couldn't see how it was entered. That said, you would NOT use code.
Does this help?
H
Wise people talk because they have something to say. Fools talk because they have to say something.
Re: Highline Videos
Looks like I got it!
Thanks Harold!
Thanks Harold!