Hi folks. I've been asked by my client to gauge interest in the trucks I am doing for him on 18" gauge. They can also be easily set up for 15" gauge by simply moving in the wheels on the axles without affecting looks or operation. They also have a provision for braking built-in to the design.
The originals are from a Carter-Morehart 18" park train from the late 1940's. The current owner acquired the engine and three coaches with only one set of trucks. My job was to measure and convert his original to CAD for 3D printing patterns. These patterns will then be investment cast in either iron or steel.
That said, is there anyone out there who would be interested in a set of the castings? I don't have hard numbers on pricing yet, but I think most of our members have gotten over sticker shock in this scale. Also, the more castings I can run, the better pricing for everyone.
Please contact me directly to discuss further. Thanks!
ADK
New grand scale trucks
Moderators: Glenn Brooks, Harold_V
Forum rules
Topics may include: antique park gauge train restoration, preservation, and history; building new grand scale equipment from scratch; large scale miniature railway construction, maintenance, and safe operation; fallen flags; track, gauge, and equipment standards; grand scale vendor offerings; and, compiling an on-line motive power roster.
Topics may include: antique park gauge train restoration, preservation, and history; building new grand scale equipment from scratch; large scale miniature railway construction, maintenance, and safe operation; fallen flags; track, gauge, and equipment standards; grand scale vendor offerings; and, compiling an on-line motive power roster.
- Adirondack
- Posts: 410
- Joined: Tue Aug 23, 2011 6:59 pm
- Location: southern CT
New grand scale trucks
Adirondack Car & Foundry
Check out our projects: https://www.facebook.com/ADKrail/
Visit our ALL-NEW online store: https://adirondackcarfoundry.square.site/
A little locomotive with 4 wheels on the track is a lot more fun
than a 1/2 finished one with 16 wheels on the bench!
Check out our projects: https://www.facebook.com/ADKrail/
Visit our ALL-NEW online store: https://adirondackcarfoundry.square.site/
A little locomotive with 4 wheels on the track is a lot more fun
than a 1/2 finished one with 16 wheels on the bench!
-
- Posts: 2930
- Joined: Mon Nov 10, 2014 1:39 pm
- Location: Woodinville, Washington
Re: New grand scale trucks
ADK, be helpful,if we could know the general dimensions of the truck frames, say, length and width and height. and what diameter wheel they will accommodate.
Also maybe PM with an estimated cost.
Thanks
Glenn
Also maybe PM with an estimated cost.
Thanks
Glenn
Moderator - Grand Scale Forum
Motive power : 1902 A.S.Campbell 4-4-0 American - 12 5/8" gauge, 1955 Ottaway 4-4-0 American 12" gauge
Ahaha, Retirement: the good life - drifting endlessly on a Sea of projects....
Motive power : 1902 A.S.Campbell 4-4-0 American - 12 5/8" gauge, 1955 Ottaway 4-4-0 American 12" gauge
Ahaha, Retirement: the good life - drifting endlessly on a Sea of projects....
Re: New grand scale trucks
The side frames are approximately 24" long with an approximate 18 1/2" center to center axle distance. The wheels are 8" tall overall with a 7" tread. Gauge is 18" but can be built at 15" to 18". Double tapered roller bearings on the axle ends makes for extremely low rolling resistance. Sprung and equalized makes these trucks very versatile and reliable.
The photo is of my Carter-Morehart often listed as an All American Streamliner. I have determined this train to be a C-M due to the coach seat configuration. Original sales advertisements stated the number of riders which corresponds to this seat arrangement. All American purchased C-M for reasons unknown. All American advertising stated a reduced number of riders and a reduced number of seats. There are known All American riding cars still on the rails providing proof.
Good Luck,
Terry
The photo is of my Carter-Morehart often listed as an All American Streamliner. I have determined this train to be a C-M due to the coach seat configuration. Original sales advertisements stated the number of riders which corresponds to this seat arrangement. All American purchased C-M for reasons unknown. All American advertising stated a reduced number of riders and a reduced number of seats. There are known All American riding cars still on the rails providing proof.
Good Luck,
Terry
- Adirondack
- Posts: 410
- Joined: Tue Aug 23, 2011 6:59 pm
- Location: southern CT
Re: New grand scale trucks
Thanks Terry.STRR wrote: ↑Mon Sep 17, 2018 6:39 pm The side frames are approximately 24" long with an approximate 18 1/2" center to center axle distance. The wheels are 8" tall overall with a 7" tread. Gauge is 18" but can be built at 15" to 18". Double tapered roller bearings on the axle ends makes for extremely low rolling resistance. Sprung and equalized makes these trucks very versatile and reliable.
The photo is of my Carter-Morehart often listed as an All American Streamliner. I have determined this train to be a C-M due to the coach seat configuration. Original sales advertisements stated the number of riders which corresponds to this seat arrangement. All American purchased C-M for reasons unknown. All American advertising stated a reduced number of riders and a reduced number of seats. There are known All American riding cars still on the rails providing proof.
Good Luck,
Terry
Adirondack Car & Foundry
Check out our projects: https://www.facebook.com/ADKrail/
Visit our ALL-NEW online store: https://adirondackcarfoundry.square.site/
A little locomotive with 4 wheels on the track is a lot more fun
than a 1/2 finished one with 16 wheels on the bench!
Check out our projects: https://www.facebook.com/ADKrail/
Visit our ALL-NEW online store: https://adirondackcarfoundry.square.site/
A little locomotive with 4 wheels on the track is a lot more fun
than a 1/2 finished one with 16 wheels on the bench!