2 1/2" scale 4-6-0 build
Moderator: Harold_V
Re: 2 1/2" scale 4-6-0 build
With my own projects I am always excited to see frame on wheels of the first time!
Looking good.
RussN
Looking good.
RussN
Re: 2 1/2" scale 4-6-0 build
Thanks Russ, yes it is.
The spring kit [known to me] was not finished. I feel if spings are offered it's good for me I do not have a punch. I have used carbide still was a pain.
The spring kit [known to me] was not finished. I feel if spings are offered it's good for me I do not have a punch. I have used carbide still was a pain.
No problems just solutions.
Re: 2 1/2" scale 4-6-0 build
These were cut off a 5/16 rod they are going to be spring rockers.
No problems just solutions.
Re: 2 1/2" scale 4-6-0 build
Well after spending some time on lengths and heights with the springs lightly loaded I'm getting good travel.
In the first pic the pivot block above the rear spring currently only has spring pressure holding it in place. I'm not sure how this is supposed to be captured . Any Ideas?
Jim
In the first pic the pivot block above the rear spring currently only has spring pressure holding it in place. I'm not sure how this is supposed to be captured . Any Ideas?
Jim
No problems just solutions.