Is this an acceptable place to post this info?
Morse:
http://shopswarf.orconhosting.net.nz/morse.html
B&S
http://shopswarf.orconhosting.net.nz/b&staper.html
Morse, B&S
http://www.oldengine.org/members/diesel ... rkson1.htm
http://www.oldengine.org/members/diesel ... rkson2.htm
5C
http://www.google.com/imgres?imgurl=htt ... A&dur=2628
http://www.dunhamtool.com/5c_collet.html
R8
http://www.oldengine.org/members/diesel ... rkson3.htm
Autolock
http://www.oldengine.org/members/diesel ... rkson4.htm
Dedlock
http://www.oldengine.org/members/diesel ... rkson5.htm
Jarno
http://shopswarf.orconhosting.net.nz/jarno.html
Misc. Tool Shank Tapers
http://www.tools-n-gizmos.com/specs/Tapers.html#R8
Collet Identification
http://web.archive.org/web/201305051638 ... ollet.html
By Machine Manufacturer
http://shopswarf.orconhosting.net.nz/colletap.html
Taper and Tool Shank Dimensions
Moderator: Harold_V
Taper and Tool Shank Dimensions
Last edited by GlennW on Sun Nov 06, 2016 9:11 pm, edited 2 times in total.
Glenn
Operating machines is perfectly safe......until you forget how dangerous it really is!
Operating machines is perfectly safe......until you forget how dangerous it really is!
Re: Taper and Tool Shank Dimensions
Glenn,
Yes, it's very acceptable. Thanks so much for your contribution.
Harold
Yes, it's very acceptable. Thanks so much for your contribution.
Harold