Looking for operator manual for a PM 1027 lathe

This is where bits of wisdom will be stored, a frequently asked question section with answers.

Moderator: Harold_V

Post Reply
Brian230
Posts: 1
Joined: Fri Jun 17, 2022 10:40 am

Looking for operator manual for a PM 1027 lathe

Post by Brian230 »

I am in need of an operators manual for a Precision Matthews 1027 lathe. I tried to get one from PM but they can't help.
User avatar
Bill Shields
Posts: 10459
Joined: Fri Dec 21, 2007 4:57 am
Location: 39.367, -75.765
Contact:

Re: Looking for operator manual for a PM 1027 lathe

Post by Bill Shields »

Picture?

Is doubtful that PM actually made the lathe.

Many of their models come from ROC -> and most any manual from a similar looking model can be used as a good starter
Too many things going on to bother listing them.
Post Reply