Lathe lead screw

Discussion on all milling machines vertical & horizontal, including but not limited to Bridgeports, Hardinge, South Bend, Clausing, Van Norman, including imports.

Moderators: GlennW, Harold_V

Post Reply
Michael_Az
Posts: 407
Joined: Sat Jan 04, 2003 10:07 am
Location: Southeastern Az

Lathe lead screw

Post by Michael_Az »

Should the lead screw be oiled or run dry?
Thanks
Michael
Saimp 2 HP 10 X 44 mill, #2 Cin Horz Mill, Cholchester 13" lathe, LeBlond 15" Dual Drive.
Matt_Isserstedt

OIL!

Post by Matt_Isserstedt »

I like Vactra #4... a little heavier
Al_Messer
Posts: 2664
Joined: Sat Jan 04, 2003 7:12 pm
Location: Mid Tenn.

Re: OIL!

Post by Al_Messer »

Just be sure to keep the swarf and grit cleaned off it!!
Al Messer

"One nation, under God"
Michael_Az
Posts: 407
Joined: Sat Jan 04, 2003 10:07 am
Location: Southeastern Az

Re: Lathe lead screw

Post by Michael_Az »

Thanks fellows, I have always oiled mine and cleaned it today and got to wondering.
Thanks again
Michael
Saimp 2 HP 10 X 44 mill, #2 Cin Horz Mill, Cholchester 13" lathe, LeBlond 15" Dual Drive.
Post Reply