Less than full size mill suggestions

Discussion on all milling machines vertical & horizontal, including but not limited to Bridgeports, Hardinge, South Bend, Clausing, Van Norman, including imports.

Moderators: GlennW, Harold_V

VelocityDuck
Posts: 118
Joined: Mon Dec 07, 2020 6:14 am
Location: Panama City, FL

Re: Less than full size mill suggestions

Post by VelocityDuck »

Bill Shields wrote: Thu Jun 30, 2022 8:39 am Common worn out bushing problem with them.
Is it difficult to replace them?
User avatar
Bill Shields
Posts: 10459
Joined: Fri Dec 21, 2007 4:57 am
Location: 39.367, -75.765
Contact:

Re: Less than full size mill suggestions

Post by Bill Shields »

no...

you have to take the top of the head apart...basic hand tools and an extra pair of hands for an hour or so....

you may also want to change the belt while U R @ it -> but you won't know until you get it open.
Too many things going on to bother listing them.
Post Reply