Is it difficult to replace them?
Less than full size mill suggestions
-
- Posts: 118
- Joined: Mon Dec 07, 2020 6:14 am
- Location: Panama City, FL
Re: Less than full size mill suggestions
- Bill Shields
- Posts: 10557
- Joined: Fri Dec 21, 2007 4:57 am
- Location: 39.367, -75.765
- Contact:
Re: Less than full size mill suggestions
no...
you have to take the top of the head apart...basic hand tools and an extra pair of hands for an hour or so....
you may also want to change the belt while U R @ it -> but you won't know until you get it open.
you have to take the top of the head apart...basic hand tools and an extra pair of hands for an hour or so....
you may also want to change the belt while U R @ it -> but you won't know until you get it open.
Too many things going on to bother listing them.