Thanks Earl, but no hurry. I figured out my set up was just fine. Inadvertently used a larger cutter and went down to 2 1/2” diameter. After review, (and learning more about the various feed settings) very happy with the existing motor and pulley configuration. Experience is The key!
Glenn
Fun making chips with my horizontal Burke #4
-
- Posts: 2930
- Joined: Mon Nov 10, 2014 1:39 pm
- Location: Woodinville, Washington
Re: Fun making chips with my horizontal Burke #4
Moderator - Grand Scale Forum
Motive power : 1902 A.S.Campbell 4-4-0 American - 12 5/8" gauge, 1955 Ottaway 4-4-0 American 12" gauge
Ahaha, Retirement: the good life - drifting endlessly on a Sea of projects....
Motive power : 1902 A.S.Campbell 4-4-0 American - 12 5/8" gauge, 1955 Ottaway 4-4-0 American 12" gauge
Ahaha, Retirement: the good life - drifting endlessly on a Sea of projects....