EMCO made Maximat Mentor 10

All discussion about lathes including but not limited to: South Bend, Hardinge, Logan, Monarch, Clausing and other HSM lathes, including imports

Moderators: GlennW, Harold_V

Post Reply
CLASSIC
Posts: 1
Joined: Tue Feb 22, 2022 4:35 am

EMCO made Maximat Mentor 10

Post by CLASSIC »

Sir!
Our subject lathe was OK till last week.
Now the CW and CCW low speed selection doesn't work.
High speed both directions OK.
We checked the selector function-ALL OK.
Continuity between selector point to terminals block. OK.
Please explain how the rotation speed is controlled in 3 phase Triangular coiled motor.
Please provide suggestion how to solve the problem.

We appreciate quick replay.

Best Regards LEON-on behave of our group
User avatar
Bill Shields
Posts: 10460
Joined: Fri Dec 21, 2007 4:57 am
Location: 39.367, -75.765
Contact:

Re: EMCO made Maximat Mentor 10

Post by Bill Shields »

?
Too many things going on to bother listing them.
Post Reply