Kurt 4" Vise's

Topics include, Machine Tools & Tooling, Precision Measuring, Materials and their Properties, Electrical discussions related to machine tools, setups, fixtures and jigs and other general discussion related to amateur machining.

Moderators: GlennW, Harold_V

Post Reply
rrnut-2
Posts: 691
Joined: Mon Jul 18, 2011 7:40 pm
Location: Bennington, NH

Kurt 4" Vise's

Post by rrnut-2 »

Just thought that I would pass this along. There are 13 Kurt 4" vises up for auction at this site. Scroll down about half way on the page.
I have no connection or interest in this.

https://www.bidspotter.com/en-us/auctio ... lse&page=2

Jim B
whateg0
Posts: 1114
Joined: Sat Mar 28, 2009 3:54 pm
Location: Wichita, KS

Re: Kurt 4" Vise's

Post by whateg0 »

All the good auctions are so far away from me!
User avatar
ctwo
Posts: 2996
Joined: Tue Mar 27, 2012 12:37 pm
Location: Silly Cone Valley

Re: Kurt 4" Vise's

Post by ctwo »

I will take #107 for $5, Alex!
Standards are so important that everyone must have their own...
To measure is to know - Lord Kelvin
Disclaimer: I'm just a guy with a few machines...
pete
Posts: 2518
Joined: Tue Feb 10, 2009 6:04 am

Re: Kurt 4" Vise's

Post by pete »

At least exterior wise they look to be in still decent condition. My guess is the final bid prices will go pretty high if enough know about them. Average prices I've seen in the past are usually around what the 6" Kurts are going for or a bit more. I don't believe Kurt still offers any rebuild or replacement parts for the 4" anymore, so they might be a bit of a gamble. In good shape I could put a few of those to use for 5 bucks apiece. :-)
Post Reply