Sourcing Type 2 Sandblast Nozzle Cap & Tips

Topics include, Machine Tools & Tooling, Precision Measuring, Materials and their Properties, Electrical discussions related to machine tools, setups, fixtures and jigs and other general discussion related to amateur machining.

Moderators: GlennW, Harold_V

Post Reply
pollys1dad
Posts: 296
Joined: Mon Jun 25, 2012 12:13 pm
Location: Wiltshire United Kingdom

Sourcing Type 2 Sandblast Nozzle Cap & Tips

Post by pollys1dad »

See attached I can only find these avaiable from one retailer ,can't locate in UK? I want to shop around for best prices and post. Does anyone know if there are any outlets that carry these items? I'm surprised I can't find same items in UK, perhaps they go by a different name?

Sandblasting Nozzles, Type 2
Brass nozzle cap holds the tip in place.
Type 2," which references size: 3/8" base, 1 5/16" length, and cone-shaped, 1/8",1/16" and 3/32" orifice size.
Nozzle gaskets helps seal nozzle, extends life of nozzle cap.
I'm after tungsten carbide, boron carbide or composite carbide in the type 2 size.
Cheers.
Attachments
Nozzle Cap.jpg
Post Reply