Vertical Band Saw: Useful?

Topics include, Machine Tools & Tooling, Precision Measuring, Materials and their Properties, Electrical discussions related to machine tools, setups, fixtures and jigs and other general discussion related to amateur machining.

Moderators: GlennW, Harold_V

User avatar
SteveHGraham
Posts: 7788
Joined: Sat Jan 17, 2009 7:55 pm
Location: Florida

Vertical Band Saw: Useful?

Post by SteveHGraham »

I have a 19" vertical band saw for woodworking. I also have a 2-HP 3-phase motor sitting around doing nothing. I am thinking it would be good to put the motor in the saw, add a VFD, and use it for metal as well as wood.

My question: is a vertical band saw handy for metalworking, or is it a waste of a good VFD? Will I actually use it?
Every hard-fried egg began life sunny-side up.
John Hasler
Posts: 1852
Joined: Tue Dec 06, 2016 4:05 pm
Location: Elmwood, Wisconsin

Re: Vertical Band Saw: Useful?

Post by John Hasler »

My vertical bandsaw (used to be a horizontal) is one of the most used machines in my shop.
whateg0
Posts: 1114
Joined: Sat Mar 28, 2009 3:54 pm
Location: Wichita, KS

Re: Vertical Band Saw: Useful?

Post by whateg0 »

I use my 4x6 in vertical mode quite a bit. It's under powered for use as vertical, though, so it's slow. Some will say that a woodworking saw isn't rigid enough to cut metal. Even with a VFD, you might need to pulley it down depending on the motor's rpm. I'd go for it!

Dave
Russ Hanscom
Posts: 1955
Joined: Wed Mar 15, 2006 11:10 pm
Location: Farmington, NM

Re: Vertical Band Saw: Useful?

Post by Russ Hanscom »

For the type of work I do, a vertical metal cutting bandsaw is great. Used to have a 14" Delta, to which I added a 4:1 speed reducer, and it cut more metal than wood. I now have 16" Doall for metal. I find it much more versatile, especially for odd angle cuts, or ripping, or other things a horizontal saw is just not set up to do.
RSG
Posts: 1541
Joined: Fri Feb 04, 2011 9:59 am
Location: Ontario, Canada

Re: Vertical Band Saw: Useful?

Post by RSG »

If I had one I'd use it often! Thankfully I have access to one at another shop.
Vision is not seeing things as they are, but as they will be.
User avatar
SteveHGraham
Posts: 7788
Joined: Sat Jan 17, 2009 7:55 pm
Location: Florida

Re: Vertical Band Saw: Useful?

Post by SteveHGraham »

I may do it. The VFD will set me back a few dollars, however.

I might go Chinese just for the heck of it. Some people claim to get good performance from them.
Every hard-fried egg began life sunny-side up.
User avatar
GlennW
Posts: 7284
Joined: Sun Apr 15, 2007 9:23 am
Location: Florida

Re: Vertical Band Saw: Useful?

Post by GlennW »

Use it all the time. Mainly for flat stock and sheet.

Slicing 7" 4140 Pre Hard.
DSC02020-1.jpg
Not sure I could do that as easily on a horizontal.
Glenn

Operating machines is perfectly safe......until you forget how dangerous it really is!
User avatar
SteveHGraham
Posts: 7788
Joined: Sat Jan 17, 2009 7:55 pm
Location: Florida

Re: Vertical Band Saw: Useful?

Post by SteveHGraham »

Is that a $39 Harbor Freight tool cart? Those things are wonderful.
Every hard-fried egg began life sunny-side up.
User avatar
GlennW
Posts: 7284
Joined: Sun Apr 15, 2007 9:23 am
Location: Florida

Re: Vertical Band Saw: Useful?

Post by GlennW »

Pretty sure the red one is!
Glenn

Operating machines is perfectly safe......until you forget how dangerous it really is!
User avatar
BadDog
Posts: 5131
Joined: Wed May 17, 2006 8:21 pm
Location: Phoenix, AZ

Re: Vertical Band Saw: Useful?

Post by BadDog »

I absolutely love my vertical, but I don't want to lose my 2 horizontals.

Vertical is a 20" RollIn Diemaster. Nice big tilting automatic feed table with up to 1" bands. Eats big chunks like nothing. But I use it mostly for stuff that fits on the table. Cutting structural material is easier done on the Horizontal. I've had it now about 4 years I think.

Middle saw is a Wellsaw 58b. A very good little horizontal, but far from top of the line. It gets most of my heavier wall structural stuff, and usually keeps a blade suitable for such things mounted so it's easy to press into service as needed. I've had it for maybe 10 years.

Small saw is the ubiquitous HF 4x6 with a few upgrades. It usually keeps a finer blade for thinner walled structural material. But is most often found in it's vertical orientation where it's used for small thin wall hand work. I've had that one since around 2000 or so.
Russ
Master Floor Sweeper
User avatar
GlennW
Posts: 7284
Joined: Sun Apr 15, 2007 9:23 am
Location: Florida

Re: Vertical Band Saw: Useful?

Post by GlennW »

Russ's vertical is the same as mine above. I've had mine since the late 1970's and it just runs and runs, although I did replace the motor earlier this year. One of the best things I've ever bought.
Glenn

Operating machines is perfectly safe......until you forget how dangerous it really is!
SteveM
Posts: 7763
Joined: Mon Jun 27, 2005 6:18 pm
Location: Wisconsin

Re: Vertical Band Saw: Useful?

Post by SteveM »

I got my dad's 1920's-1930's Wallace 16" bandsaw.

Has a DC motor (yes, they were available with DC motors in the 1920's) and dad made a speed control for it, so it can go slow enough to cut metal.

Just picked up some bandsaw blade stock on ebay and I will have blades from 1/8" 32tpi to 1" 2tpi.

The narrower blades are great for cutting out shapes in sheet metal. The wider ones for helping your cut go straight.

The 2tpi is for cutting thick pieces of wood. I need to get 4tpi and 8tpi to have a "complete set".

I can grind and silver solder a blade in about 10 minutes with an ordinary torch.

Steve
Post Reply