Missing controller on Backyard Rails engine

This forum is dedicated to Riding Scale Railroading with propulsion using other than steam (Hydraulics, diesel engines, gas engines, electric motors, hybrid etc.)

Moderator: Harold_V

Post Reply
Rog0305
Posts: 9
Joined: Fri Jun 22, 2012 2:46 pm

Missing controller on Backyard Rails engine

Post by Rog0305 »

Just wanted to pick some brains on replacing the controller on a backyard rails GP50. Does anyone have schematics or possibly a picture of the controller would be helpful. Much appreciated!
Roger Williams
User avatar
Steggy
Posts: 1976
Joined: Tue Jun 28, 2011 9:19 pm
Location: JB Pritzker’s Hellhole
Contact:

Re: Missing controller on Backyard Rails engine

Post by Steggy »

Rog0305 wrote: Fri Jun 03, 2022 9:40 pm Just wanted to pick some brains on replacing the controller on a backyard rails GP50. Does anyone have schematics or possibly a picture of the controller would be helpful. Much appreciated!

Are you referring to the servo that controls the engine's carburetor or the control box that has relays in it?
———————————————————————————————————————————————————————
Music isn’t at all difficult.  All you gotta do is play the right notes at the right time!  :D
Rog0305
Posts: 9
Joined: Fri Jun 22, 2012 2:46 pm

Re: Missing controller on Backyard Rails engine

Post by Rog0305 »

I bought a backyard rails engine missing the remote control that plugs into then outside of the loco. It seems that the control relay box inside the engine is intact.
Roger Williams
Post Reply