Hey folks. I had these images in my "research" folder. I am progressing with my 3/4" scale high-line SW1500 project, and wanted to see if I could ask the designer of these parts a few questions.
I have no idea where I saw them first, but given the filenames, Facebook might be a good place to start.
Thanks
Chris
Does anyone recognize these 3D prints?
Moderator: Harold_V
- Adirondack
- Posts: 410
- Joined: Tue Aug 23, 2011 6:59 pm
- Location: southern CT
Does anyone recognize these 3D prints?
Adirondack Car & Foundry
Check out our projects: https://www.facebook.com/ADKrail/
Visit our ALL-NEW online store: https://adirondackcarfoundry.square.site/
A little locomotive with 4 wheels on the track is a lot more fun
than a 1/2 finished one with 16 wheels on the bench!
Check out our projects: https://www.facebook.com/ADKrail/
Visit our ALL-NEW online store: https://adirondackcarfoundry.square.site/
A little locomotive with 4 wheels on the track is a lot more fun
than a 1/2 finished one with 16 wheels on the bench!
Re: Does anyone recognize these 3D prints?
Well, I do know there is an open source locomotive on Thingiverse for Gauge 1. It's either a SW1500 or RS3. Pretty sure it is a SW1500. You may want to look there.
- Adirondack
- Posts: 410
- Joined: Tue Aug 23, 2011 6:59 pm
- Location: southern CT
Re: Does anyone recognize these 3D prints?
No, these are different. Much, much more detailed than the files in that model.
Thanks
Chris
Adirondack Car & Foundry
Check out our projects: https://www.facebook.com/ADKrail/
Visit our ALL-NEW online store: https://adirondackcarfoundry.square.site/
A little locomotive with 4 wheels on the track is a lot more fun
than a 1/2 finished one with 16 wheels on the bench!
Check out our projects: https://www.facebook.com/ADKrail/
Visit our ALL-NEW online store: https://adirondackcarfoundry.square.site/
A little locomotive with 4 wheels on the track is a lot more fun
than a 1/2 finished one with 16 wheels on the bench!
-
- Posts: 66
- Joined: Thu Sep 14, 2006 8:44 pm
- Location: Nanticoke, Pa
Re: Does anyone recognize these 3D prints?
That would be me.
Re: Does anyone recognize these 3D prints?
Do you have more information on your project? A thread? Web page?
-
- Posts: 66
- Joined: Thu Sep 14, 2006 8:44 pm
- Location: Nanticoke, Pa
Re: Does anyone recognize these 3D prints?
Nothing really to report. Got those prints back, need to change a few things and completely sort out the drive before I can go any further. Do have the majority of an S4 drawn up to go on top of them but so many projects and only so much time.