Model Steam Pressure Gauges
Moderators: gwrdriver, Harold_V
-
- Posts: 237
- Joined: Thu Feb 26, 2009 6:21 pm
- Location: So. California
Re: Model Steam Pressure Gauges
I am interested in a gauge in the 250# range if you decide to make them.
Timmy
Timmy
illigitimi non carborundum
-
- Posts: 2930
- Joined: Mon Nov 10, 2014 1:39 pm
- Location: Woodinville, Washington
Re: Model Steam Pressure Gauges
Yes, I would be interested in a 250-300 psi gauge also- preferably larger than 2” diameter. Tiny gauges aren’t meant to be seen very well! I can live with a bit of distortion in the scale when it comes to safety and ease of reading.
Moderator - Grand Scale Forum
Motive power : 1902 A.S.Campbell 4-4-0 American - 12 5/8" gauge, 1955 Ottaway 4-4-0 American 12" gauge
Ahaha, Retirement: the good life - drifting endlessly on a Sea of projects....
Motive power : 1902 A.S.Campbell 4-4-0 American - 12 5/8" gauge, 1955 Ottaway 4-4-0 American 12" gauge
Ahaha, Retirement: the good life - drifting endlessly on a Sea of projects....
Re: Model Steam Pressure Gauges
My gauge (including the 3/16” fitting) came in the mail today, and it is beautiful! If you decide to offer them in the 0-250 psi range, I’ll buy one of those too!
Dan Watson
Chattanooga, TN
Chattanooga, TN
Re: Model Steam Pressure Gauges
Recieved mine. I loved it. Can I have another? 160 or 200 lbs?
Re: Model Steam Pressure Gauges
Glad to hear everyone is enjoying the gauges so far. We're working on getting ready for the next batch of them. As far as pressures I can do 160psig with/without the words locomotive on it right away if there is interest in those. I am thinking some of the 160psig gauges may be handy for compressed air on larger scale locomotives.
I am also working on a larger 2-1/2", 300psig locomotive gauge too. 200psig and 250 though may be a little bit further on the horizon. I will also make sure to have more of the compression fittings next time around.
Thanks,
Adam
I am also working on a larger 2-1/2", 300psig locomotive gauge too. 200psig and 250 though may be a little bit further on the horizon. I will also make sure to have more of the compression fittings next time around.
Thanks,
Adam
Re: Model Steam Pressure Gauges
Would love to see a 250 PSI version with a black moon dial.
Cheers,
-Mike
Cheers,
-Mike
Live Steam Photography and more - gallery.mikemassee.com
Product Development and E-Commerce, Allen Models of Nevada
Product Development and E-Commerce, Allen Models of Nevada
Re: Model Steam Pressure Gauges
would like one of the 300 lb gauges. Any chance of a red line at 125 lb? Put me down for one either way, with fitting. Thanks, nabob @ncn.net (let me know how much and when you want it.)
-
- Posts: 2
- Joined: Mon Aug 05, 2019 1:18 pm
Re: Model Steam Pressure Gauges
Hi, are these guages still available? I need will need six for an Alco northern rated 150 psi or higher. Thanks John
Re: Model Steam Pressure Gauges
Hi John,John Roadcap wrote: ↑Fri Nov 15, 2019 7:06 pm Hi, are these guages still available? I need will need six for an Alco northern rated 150 psi or higher. Thanks John
As luck would have it we just finished a run of 6 of the straight up Brass ones and if you want to take all 6 of them and can get back to me by 5pm Sunday afternoon I will hold them for you, otherwise they are first come first serve.
We also have available at this time qnty 4 nickel plated gauges which are available at $175each, plus more of the compression fittings at $10 each to go along with the gauge.
The photos really aren't doing any justice here for the nickel plated gauges if the brass ones look beautiful in nickel plate they area almost stunning.
If interested please send money via paypal plus $10shipping to my paypal address. Outside of waiting on John to take all 6 of them they will be first come first serve, so if you want one please send payment to adam@miller4.org. I can always refund you if I have sold out.
I do appreciate everyone's patience as we try to scale up and make more of these.
One other interesting thing. I see a lot of requests here for a 250psig version. Since we are not making our own bourdon tubes here that is a lot harder. It seems virtually no one out there makes a gauge in that range as a starting point to go off of. So the options are 160psig, 200, and 300. If there is a lot of demand 200 won't be that hard to do and I already have the artwork for more 160psig versions both with/without the word locomotive on them as soon as we can make more of those too.
Thanks,
Adam
Re: Model Steam Pressure Gauges
For gauges that need to go to 125 PSI operating pressure, 200 PSI max is fine. I'd rather be over than under the center of the gauge at operating pressure if I had to pick one. It gives more granularity. The Chloe's gauge is 200 PSI and no problems.apm wrote: ↑Fri Nov 15, 2019 10:30 pm One other interesting thing. I see a lot of requests here for a 250psig version. Since we are not making our own bourdon tubes here that is a lot harder. It seems virtually no one out there makes a gauge in that range as a starting point to go off of. So the options are 160psig, 200, and 300. If there is a lot of demand 200 won't be that hard to do and I already have the artwork for more 160psig versions both with/without the word locomotive on them as soon as we can make more of those too.
Thanks,
Adam
Live Steam Photography and more - gallery.mikemassee.com
Product Development and E-Commerce, Allen Models of Nevada
Product Development and E-Commerce, Allen Models of Nevada
Re: Model Steam Pressure Gauges
I opened up an online store for these gauges where I currently have the 300psig versions for sale in both brass and nickel plate I have yet to hear from John so right now they are all for sale. I hope to add a few more options in the near future.
https://www.modelgauge.com/
In the case where I am not ready to offer some of the other sizes complete I hope to at least get some of them up there in DIY kit format to offer a lower cost point for those who enjoy doing the machine work themselves.
Thanks,
Adam
https://www.modelgauge.com/
In the case where I am not ready to offer some of the other sizes complete I hope to at least get some of them up there in DIY kit format to offer a lower cost point for those who enjoy doing the machine work themselves.
Thanks,
Adam
Re: Model Steam Pressure Gauges
Just updated the website to add 200, and 160psig gagues. The 200psig ones all say locomotive, the 160psig ones don't and would be perfect for auxillaries such as compressed air. Here's some photos;
The gauges can be found on
https://www.modelgauge.com
By the way anyone who I have sold these to have any good photos of them in use yet?
If there is any interest probaby next run will be to do some 2.5" sizes for the larger locomotives. The gauges can be found on
https://www.modelgauge.com
By the way anyone who I have sold these to have any good photos of them in use yet?