Newby with a 1340

This forum is dedicated to those hobbyists with the 3-in-1 metalworking machines. Mill-Drill-Lathes. Tips, techniques, modification and use of these machines is topical.

Moderator: Harold_V

Post Reply
mechanic3
Posts: 2
Joined: Thu Sep 22, 2022 5:05 pm

Newby with a 1340

Post by mechanic3 »

Hello Guys
Newby to this site and machining last year I got a Granett 1340 and been playing with it and I notisit a strange spot on the cross slide that looks like a drilled spot that a oiler was going to be can anybody here with a 1340 send a pic like the one here to see if a oileris here or does yours have the same mark
thanks
Smithy Oil Port.jpg
IMG_20210717_165536.jpg
shopguy
Posts: 2
Joined: Sun Jan 22, 2023 10:39 pm

Re: Newby with a 1340

Post by shopguy »

That is a dowl pin for locating the lower part of carriage.
Post Reply