Enco 105-1100 Broken Spindle Depth Stop

This forum is dedicated to those hobbyists with the 3-in-1 metalworking machines. Mill-Drill-Lathes. Tips, techniques, modification and use of these machines is topical.

Moderator: Harold_V

Post Reply
Posts: 1
Joined: Tue Aug 21, 2018 10:13 am
Location: Mountlake Terrace, WA

Enco 105-1100 Broken Spindle Depth Stop

Post by Oldhenry1 » Thu Jul 21, 2022 2:09 pm

This is my first foray into the machining world. I am a complete novice.

I picked up an older Enco 105-1100 locally awhile back.

I didn't notice at the time the casting on the spindle for the depth stop is broken off.
Drill Stop.jpg
Drill Stop.jpg (19.66 KiB) Viewed 1319 times

It's pinch bolted on the backside of the spindle but when loosened, it won't clear the larger lower end of the spindle assy.
Hopefully I won't have to completely remove the spindle itself to access it. If that's the case I think I'll leave it as is.

I haven't found a manual online yet and am coming up empty.

Any help would be greatly appreciated.

Post Reply