Hand Molding Videos on youtube

Home enthusiasts discuss their Foundry & Casting work.

Moderator: Harold_V

Post Reply
steamingon
Posts: 58
Joined: Sun May 08, 2005 8:02 pm

Hand Molding Videos on youtube

Post by steamingon » Sun Apr 25, 2021 5:32 am


RONALD
Posts: 668
Joined: Sun Oct 26, 2003 7:27 am

Re: Hand Molding Videos on youtube

Post by RONALD » Wed Apr 28, 2021 7:42 pm

I finally got around to looking at your posted video's, and it certainly is the way I have been molding flasks (some made of wood) for several decades, with one exception, I have never worked in bare feet or had my body so exposed to molten metal as those who cast metal in Asia.

Of course, if you want to go back 115 years, we were doing it almost the same way. I posted this photo before; OSHA would have had a "field day" if a company poured metal like that today!
DSCN2678_2.jpg
In these times when I pour metal, I take the same precautions the big guys do, even tho I have nobody like OSHA to worry about.
DSC_0722.JPG
Harold is getting ready to lite off his Induction Furnace in a few weeks, and he will produce his molds about the same way those Asians are doing - I'm not sure if he will pour the molten iron with bare feet and a tee shirt on, but one never knows!

Here are the students at a technical high school making up molds in 1977, a scene that can not be repeated today, because most high school shops have long been closed. They are doing things basically the same way as the Asians, but not sitting in the sand with bare feet. For most, it was a wonderful experience.
DSCN3129.JPG

User avatar
NP317
Posts: 3528
Joined: Tue Jun 24, 2014 2:57 pm
Location: Northern Oregon

Re: Hand Molding Videos on youtube

Post by NP317 » Wed Apr 28, 2021 9:40 pm

And that last photo of the 1977 foundry class sure looks just like those I taught at the University of Washington Mechanical Engineering College through 2010!
We even had the same type of muller, with tires that always seemed to need more air pressure to roll...
No longer taught now. All the foundry equipment was replaced with 3D printers and serious HAAS milling centers. Well utilized too.
RussN

Post Reply