Search found 5 matches
- Sun Mar 21, 2021 11:44 pm
- Forum: Live Steam
- Topic: Future considerations from EE
- Replies: 42
- Views: 35055
Re: Future considerations from EE
I'm definitely in for a couple of Nathan top feed checks.
- Fri Jan 08, 2021 4:39 pm
- Forum: Live Steam
- Topic: Boiler band material.
- Replies: 14
- Views: 10024
Re: Boiler band material.
Wow that thing will pull like crazy then. So you added .125 of lead under the entire jacketing that you put on it ? I added 2 layers of .125 lead on the barrel, and 1 layer over the firebox. I left an air gap between the lead and the jacket on the barrel. Over the firebox has 1 layer of insulation ...
- Fri Jan 08, 2021 10:17 am
- Forum: Live Steam
- Topic: Boiler band material.
- Replies: 14
- Views: 10024
Re: Boiler band material.
HI, Jim! I'm thinking the lead lagging added about 100 lbs. I bought 20 sq. ft. (160lb.) of .125 lead sheet. At this point, it will be easier for me to weigh what I have left over, and calculate the difference. I'm still going to fill the pilot beam with lead, and likely add some between the frame a...
- Thu Jan 07, 2021 12:46 pm
- Forum: Live Steam
- Topic: Boiler band material.
- Replies: 14
- Views: 10024
Re: Boiler band material.
Thank you, everyone. I was leaning towards the banding/strapping material. I've only been able to find 3/4" in the trash so far. But, yes, lots of that available at large retail/industrial establishments. If I can't find any in the trash, I'll just have to order a mini roll. This is going on a ...
- Wed Jan 06, 2021 12:19 pm
- Forum: Live Steam
- Topic: Boiler band material.
- Replies: 14
- Views: 10024
Boiler band material.
Good morning.
I could not find an answer using the search feature.
What material do some of you use for the boiler/jacket bands? Particularly for 1.5/1.6 scale. The only thing I can find in 5/8" wide - .025-.040 thick, the range I would like to use, is 1095 spring steel.
Thank you.
I could not find an answer using the search feature.
What material do some of you use for the boiler/jacket bands? Particularly for 1.5/1.6 scale. The only thing I can find in 5/8" wide - .025-.040 thick, the range I would like to use, is 1095 spring steel.
Thank you.